Module 2 · NEET Chemistry

Chemical Bonding & Molecular Structure

Updated 17 Nov 2026 · 3,688 words · 6 sections · illustrated
Updated 20 Nov 2026
Ionic and covalent bonds, VSEPR, hybridisation, molecular orbital theory and hydrogen bonding.
Ionic · Covalent · VSEPR · MOT
🎯 Take Mock Test
Ideal Gas EquationNernst EquationArrhenius EquationModern PeriodicTablePeriodic TrendsBlockCharacteristicsderivesderivesleads toleads toCore equations linking state, potential & ratePeriodic table logic for property trendsvlymbooq
Key Chemical Equations and Periodic Table Concepts for NEET — Shows how fundamental equations connect thermodynamics, electrochemistry, kinetics and how periodic‑table structure drives property trends for NEET. · Open the full diagram →

Learning Objectives

  • Understand the fundamental concepts of Chemical Bonding & Molecular Structure
  • Apply key formulas and techniques to solve problems
  • Practice with exam-level questions to build speed and accuracy

Ionic Bonding and Lattice Energy

1.1 Formation of Ionic Bonds

Ionic bonding arises when atoms with a large difference in electronegativity transfer electrons so that each achieves a stable noble‑gas configuration. The metal atom, typically from Group 1 or Group 2, loses one or two electrons to become a cation, while the non‑metal atom, often from Group 16 or Group 17, gains those electrons to become an anion. The electrostatic attraction between the oppositely charged ions then holds the crystal lattice together. This process is driven by the overall decrease in potential energy of the system, which can be quantified by the lattice energy released when gaseous ions combine to form a solid.

1.2 Factors Influencing Lattice Energy

The magnitude of lattice energy depends primarily on the charges of the ions and the distance between their nuclei. According to the Born‑Landé equation, lattice energy is directly proportional to the product of the ionic charges and inversely proportional to the sum of the ionic radii. Consequently, a compound such as MgO, with doubly charged Mg²⁺ and O²⁻ ions, possesses a much larger lattice energy than NaCl, where both ions carry a single charge. Smaller ions also lead to shorter inter‑ionic distances, further increasing the lattice energy. These trends explain why high‑charge, small‑radius ionic solids have very high melting points and are often hard and brittle.

1.3 Born‑Haber Cycle and Thermodynamic Consistency

The Born‑Haber cycle provides a thermodynamic pathway that links the enthalpy of formation of an ionic solid to measurable quantities such as ionisation energy, electron affinity, sublimation energy, bond dissociation energy, and lattice energy. By applying Hess’s law, the cycle demonstrates that the sum of all steps equals the standard enthalpy of formation. This relationship allows chemists to calculate lattice energies indirectly when direct measurement is impractical, and it also serves as a check on the internal consistency of experimental thermochemical data.

Covalent Bonding and Bond Polarity

2.1 Electron Sharing and Bond Formation

Covalent bonds result from the sharing of one or more pairs of electrons between atoms of comparable electronegativity. Each shared pair constitutes a single bond; two shared pairs give a double bond, and three give a triple bond. The overlap of atomic orbitals creates a region of increased electron density between the nuclei, lowering the potential energy of the system. The strength of a covalent bond is reflected in its bond dissociation energy, which varies with the extent of orbital overlap and the number of shared electron pairs.

2.2 Polar Covalent Bonds and Electronegativity Difference

When the two atoms differ in electronegativity, the shared electron pair is drawn closer to the more electronegative atom, creating a dipole. The degree of polarity is commonly estimated from the Pauling electronegativity difference: a difference below 0.4 is considered essentially non‑polar, between 0.4 and 1.7 polar covalent, and above 1.7 largely ionic. This continuum explains why bonds such as H–F are strongly polar while C–H bonds are only weakly polar. The resulting molecular dipole moment depends not only on individual bond dipoles but also on the molecular geometry, which determines whether bond dipoles cancel or add vectorially.

2.3 Resonance and Delocalisation

In many molecules a single Lewis structure cannot adequately describe the electron distribution. Resonance structures represent alternative arrangements of π‑electrons and lone pairs that differ only in the position of electrons, not nuclei. The true electronic structure is a resonance hybrid, with delocalised electrons spread over several atoms. Delocalisation lowers the overall energy of the molecule, often resulting in bond lengths intermediate between typical single and double bonds, as seen in benzene where all C–C bonds are equivalent at approximately 1.39 Å.

Example 1: Determining Bond Polarity
Predict whether the bond in hydrogen chloride (HCl) is non‑polar covalent, polar covalent, or ionic. Use Pauling electronegativity values: H = 2.20, Cl = 3.16.
The electronegativity difference Δχ = 3.16 − 2.20 = 0.96. Since 0.4 < Δχ < 1.7, the H–Cl bond is classified as polar covalent. The chlorine atom bears a partial negative charge (δ⁻) and hydrogen a partial positive charge (δ⁺), giving HCl a permanent dipole moment of about 1.08 D.
Exam‑Day Insight
When a question asks for the “type of bond” based on electronegativity difference, always quote the numerical Δχ and the conventional boundaries (0.4 and 1.7). Examiners award marks for showing the calculation, not just the final label.

VSEPR Theory and Molecular Geometry

3.1 Electron‑Pair Repulsion Principle

The Valence Shell Electron Pair Repulsion (VSEPR) model predicts molecular shapes by assuming that electron domains — bonding pairs and lone pairs — arrange themselves around a central atom to minimise repulsions. The order of repulsion strength is lone‑pair–lone‑pair > lone‑pair–bonding‑pair > bonding‑pair–bonding‑pair. Consequently, lone pairs occupy more space and compress adjacent bond angles relative to the ideal geometry. For example, in water (H₂O) the two lone pairs on oxygen push the H–O–H angle down to 104.5°, compared with the tetrahedral angle of 109.5°.

3.2 Common Steric Numbers and Their Geometries

The steric number (SN) equals the number of σ‑bonds plus the number of lone pairs on the central atom. SN = 2 gives a linear arrangement (180°), SN = 3 gives trigonal planar (120°), SN = 4 gives tetrahedral (109.5°), SN = 5 gives trigonal bipyramidal (90° and 120°), and SN = 6 gives octahedral (90°). When lone pairs are present, the molecular geometry — the arrangement of atoms only — deviates from the electron‑domain geometry: SN = 4 with one lone pair yields a trigonal pyramidal shape (e.g., NH₃), while SN = 4 with two lone pairs yields a bent shape (e.g., H₂O).

3.3 Predicting Shapes of Polyatomic Ions

VSEPR applies equally to cations and anions. The ammonium ion (NH₄⁺) has SN = 4 and no lone pairs, so it is tetrahedral. The nitrate ion (NO₃⁻) has SN = 3 with one double bond and two single bonds resonance‑delocalised; the electron‑domain geometry is trigonal planar and the molecular geometry is also trigonal planar. The xenon tetrafluoride molecule (XeF₄) has SN = 6 with two lone pairs occupying axial positions, giving a square‑planar molecular geometry. These predictions are routinely tested by asking students to draw the Lewis structure, count electron domains, and name both the electron‑domain and molecular geometries.

Comparison of Electron‑Domain and Molecular Geometries for Selected Steric Numbers
Steric NumberElectron‑Domain GeometryLone PairsMolecular GeometryExample
2Linear0LinearCO₂
3Trigonal planar0Trigonal planarBF₃
3Trigonal planar1BentSO₂
4Tetrahedral0TetrahedralCH₄
4Tetrahedral1Trigonal pyramidalNH₃
4Tetrahedral2BentH₂O
5Trigonal bipyramidal0Trigonal bipyramidalPCl₅
5Trigonal bipyramidal1See‑sawSF₄
6Octahedral0OctahedralSF₆
6Octahedral2Square planarXeF₄
Quantum MechanicalFoundationss-Block Groups 1–2d-Block TransitionMetalsp-Block Groups13–18f-Block Lanthanides& Actinidesns¹⁻² valence, high reactivity(n-1)d¹⁻¹⁰ ns⁰⁻², variable oxidationns² np¹⁻⁶, diverse non-metal to metal(n-2)f¹⁻¹⁴ (n-1)d⁰⁻¹ ns², +3 dominantAufbau principle → n+l rule → block sequencevlymbooq
Periodic Table Block Structure and Quantum Foundations — Shows how quantum numbers define the four periodic blocks and their characteristic chemistry. · Open the full diagram →

Hybridisation and Orbital Overlap

4.1 Concept of Hybrid Orbitals

Hybridisation is a mathematical mixing of atomic orbitals on the same atom to produce a set of equivalent hybrid orbitals that are oriented in space according to the VSEPR‑predicted geometry. The number of hybrid orbitals formed equals the number of atomic orbitals mixed. For instance, one s and three p orbitals combine to give four sp³ hybrids directed toward the corners of a tetrahedron. The hybrid orbitals then overlap with orbitals on neighbouring atoms to form σ‑bonds, while any unhybridised p orbitals can overlap side‑on to form π‑bonds.

4.2 Common Hybridisation Schemes

sp hybridisation (linear, 180°) involves one s and one p orbital, leaving two unhybridised p orbitals for two π‑bonds as in acetylene (C₂H₂). sp² hybridisation (trigonal planar, 120°) uses one s and two p orbitals, leaving one p orbital for a π‑bond, typical of ethene (C₂H₄) and the carbonyl carbon in aldehydes. sp³ hybridisation (tetrahedral, 109.5°) uses all three p orbitals, giving four σ‑bonds as in methane (CH₄). For expanded octets, d orbitals participate: sp³d (trigonal bipyramidal) and sp³d² (octahedral) hybridisations are invoked for molecules such as PCl₅ and SF₆ respectively.

4.3 Hybridisation and Bond Angles in Distorted Geometries

When lone pairs occupy hybrid orbitals, the ideal bond angles are reduced because lone‑pair orbitals exert greater repulsion. In ammonia (NH₃) the nitrogen is sp³ hybridised; one hybrid holds a lone pair, and the three N–H bonds use the remaining three hybrids, giving an H–N–H angle of 107°, slightly less than the tetrahedral angle. In water, two sp³ hybrids hold lone pairs, compressing the H–O–H angle further to 104.5°. The concept of “partial hybridisation” is sometimes used to rationalise intermediate angles, but the standard VSEPR‑hybridisation framework remains the primary tool for exam‑level predictions.

Hybridisation Types, Orbital Composition, and Typical Geometries
HybridisationOrbitals MixedNumber of Hybrid OrbitalsElectron‑Domain GeometryTypical Example
sp1 s + 1 p2LinearBeCl₂, C₂H₂
sp²1 s + 2 p3Trigonal planarBF₃, C₂H₄
sp³1 s + 3 p4TetrahedralCH₄, NH₃, H₂O
sp³d1 s + 3 p + 1 d5Trigonal bipyramidalPCl₅
sp³d²1 s + 3 p + 2 d6OctahedralSF₆

Molecular Orbital Theory and Bond Order

5.1 Formation of Molecular Orbitals

Molecular Orbital (MO) theory treats electrons in a molecule as occupying orbitals that extend over the entire nuclear framework. Atomic orbitals combine linearly to give an equal number of molecular orbitals: bonding orbitals (lower energy, constructive interference) and antibonding orbitals (higher energy, destructive interference). For diatomic molecules of the second period, the ordering of MOs depends on the energy gap between the 2s and 2p atomic orbitals. In molecules up to N₂ the σ₂p orbital lies above the π₂p orbitals, whereas from O₂ onward the σ₂p drops below the π₂p due to increased s‑p mixing.

5.2 Bond Order and Magnetic Behaviour

Bond order is defined as half the difference between the number of electrons in bonding MOs and the number in antibonding MOs. A bond order of zero indicates no bond; a bond order of one corresponds to a single bond, two to a double bond, and three to a triple bond. MO theory correctly predicts the paramagnetism of O₂, which has two unpaired electrons in the degenerate π*₂p antibonding orbitals, giving a bond order of two. In contrast, N₂ has all electrons paired and a bond order of three, consistent with its strong triple bond and diamagnetism.

5.3 Application to Heteronuclear Diatomics and Polyatomics

For heteronuclear diatomics such as CO or NO, the atomic orbitals contribute unequally to each MO, polarising the electron density toward the more electronegative atom. The MO diagram still yields a bond order that matches experimental bond lengths and strengths. In polyatomic molecules, group theory is used to construct symmetry‑adapted linear combinations of atomic orbitals, leading to delocalised MOs that explain phenomena such as the aromatic stability of benzene (six π electrons occupying three bonding π MOs). While a full group‑theoretical treatment is beyond the introductory syllabus, the qualitative MO picture of delocalisation and bond order remains a powerful conceptual tool.

Hydrogen Bonding and Its Consequences

6.1 Nature of the Hydrogen Bond

A hydrogen bond is a special type of dipole–dipole interaction that occurs when a hydrogen atom covalently bonded to a highly electronegative atom (N, O, or F) experiences an attractive force toward a lone pair on a neighbouring electronegative atom. The interaction energy typically ranges from 10 to 40 kJ mol⁻¹, stronger than ordinary van der Waals forces but weaker than covalent bonds. The directionality of the hydrogen bond — preferring a near‑linear X–H···Y arrangement — arises from the overlap of the hydrogen 1s orbital with the lone‑pair orbital on the acceptor atom.

6.2 Effects on Physical Properties

Hydrogen bonding dramatically elevates boiling points, melting points, and viscosities of substances that can form extensive networks. Water’s anomalously high boiling point (100 °C) compared with H₂S (−60 °C) is a classic illustration: each water molecule can donate two and accept two hydrogen bonds, creating a three‑dimensional network. In contrast, hydrogen sulfide lacks sufficiently electronegative sulfur to form strong hydrogen bonds, so only weak dipole–dipole forces operate. Similar reasoning explains why HF boils at 19.5 °C while HCl boils at −85 °C, and why ammonia (−33 °C) has a higher boiling point than phosphine (−87 °C).

6.3 Hydrogen Bonding in Biological Macromolecules

In biology, hydrogen bonds stabilise the secondary structures of proteins (α‑helices and β‑sheets) and the double helix of DNA. In an α‑helix, the carbonyl oxygen of residue i accepts a hydrogen bond from the amide hydrogen of residue i + 4, creating a regular helical geometry. In DNA, complementary base pairs (A–T with two hydrogen bonds, G–C with three) provide the specificity required for replication and transcription. The cumulative effect of many relatively weak hydrogen bonds yields a stable yet reversible association, essential for processes such as strand separation during DNA replication.

Understanding the interplay between ionic, covalent, and hydrogen bonding, together with the predictive power of VSEPR, hybridisation, and molecular orbital theory, equips students to rationalise molecular structure, reactivity, and macroscopic properties across the whole of chemistry.

Fajan’s Rules and Covalent Character in Ionic Compounds

Fajan’s rules rationalise why many “ionic” compounds display measurable covalent character. The central idea is polarisation: a small, highly charged cation distorts the electron cloud of a large, highly charged anion, drawing electron density into the internuclear region and creating partial covalent sharing. The polarising power of a cation scales with charge ÷ ionic radius, while the polarisability of an anion scales with ionic radius ÷ charge. Consequently, Li⁺ (radius ≈ 76 pm, charge +1) polarises I⁻ (radius ≈ 206 pm, charge −1) far more than Na⁺ does, giving LiI a pronounced covalent contribution reflected in its lower melting point (469 °C) compared with NaI (660 °C). Similarly, Ag⁺ (radius ≈ 115 pm, +1) with its pseudo‑noble‑gas configuration (4d¹⁰) is highly polarising, so AgCl, AgBr and AgI show increasing covalent character and decreasing solubility in water. The rules also predict that cations with high charge (+2, +3) and small size (Be²⁺, Al³⁺) produce strongly covalent “ionic” compounds such as BeCl₂ (linear, polymeric in solid) and AlCl₃ (dimeric Al₂Cl₆ in vapour). In contrast, large, low‑charge cations (K⁺, Cs⁺) and small, low‑charge anions (F⁻, O²⁻) form predominantly ionic lattices with high lattice energies and high melting points. Quantitatively, the percent covalent character can be estimated from the difference between experimental lattice energy (Born‑Haber) and the purely electrostatic Kapustinskii value; a deviation > 15 % signals significant covalency. These trends are routinely tested through questions on solubility order, melting‑point anomalies, and the nature of bonding in metal halides.

Beyond Octet: Hypervalent Molecules and Expanded Octet Exceptions

Hypervalency describes species in which a central atom accommodates more than eight valence electrons. Classic examples include PF₅ (10 e⁻), SF₆ (12 e⁻), ClF₃ (10 e⁻) and XeF₂ (10 e⁻). Early textbooks invoked d‑orbital participation (sp³d, sp³d² hybridisation) to rationalise the expanded octet, but modern computational studies show that d‑orbitals contribute negligibly for main‑group elements; instead, three‑centre‑four‑electron (3c‑4e) bonds and extensive p‑orbital delocalisation provide a more accurate description. In SF₆, six S–F σ bonds are formed from overlap of sulfur 3p orbitals with fluorine 2p orbitals, while the sulfur 3s orbital remains largely non‑bonding; the octet is effectively expanded by using the empty 3d orbitals only as high‑energy polarisation functions, not as valence hybrids. VSEPR still predicts the correct geometries (trigonal bipyramidal for PF₅, octahedral for SF₆, T‑shaped for ClF₃, linear for XeF₂) because the steric number counts electron domains, not the origin of the orbitals. However, bond angles in hypervalent molecules often deviate from ideal values: the axial F–S–F angle in SF₆ is exactly 180°, but the equatorial F–P–F angles in PF₅ are 120°, while the axial‑equatorial angles are 90°. In ClF₃, the two lone pairs occupy equatorial positions of a trigonal‑bipyramidal electron geometry, compressing the axial Cl–F bonds to ≈ 87.5°. The concept of hypervalency also extends to noble‑gas compounds (XeF₄, XeO₃) where the central atom uses its vacant 5d orbitals only as polarisation functions. Examination questions frequently ask to identify hypervalent species from Lewis structures, to predict shapes using steric numbers, and to explain why d‑orbital hybridisation is a poor model for main‑group hypervalency.

Technique: Identifying Hypervalent Species from Lewis Structures
Question: Determine whether the molecule ClF₃ is hypervalent and predict its shape using VSEPR.
Solution: Count valence electrons: Cl (7) + 3×F (7 each) = 28 electrons. Draw Lewis structure with Cl central, three single bonds to F (6 electrons) and three lone pairs on each F (18 electrons) = 24 electrons used. Remaining 4 electrons go as two lone pairs on Cl. Total electron domains around Cl = 5 (3 bonding pairs + 2 lone pairs) → steric number 5 → trigonal bipyramidal electron geometry. With two lone pairs occupying equatorial positions, molecular shape is T‑shaped. Since Cl has 10 electrons in its valence shell (5 pairs), it exceeds the octet → hypervalent.
Exam‑Day Strategy
When a central atom from period 3 or below shows more than four electron domains, immediately flag it as hypervalent; use the steric number to pick the correct VSEPR geometry without drawing full MO diagrams.

Molecular Orbital Theory for Polyatomic Systems: Walsh Diagrams and Photoelectron Spectroscopy

Walsh diagrams correlate molecular geometry with the energies of valence molecular orbitals, providing a predictive framework for the shapes of small polyatomic molecules. For AH₂ species (A = Be, B, C, N, O), the diagram plots orbital energies as the H–A–H angle varies from 180° (linear) to 90° (bent). In linear BeH₂, the σg (2s) and σu (2p_z) orbitals are low‑lying, while the degenerate πu (2p_x, 2p_y) set lies higher; bending stabilises the σu orbital (which gains s‑character) and destabilises the πu set, favouring a linear geometry for a 4‑electron system (BeH₂). For BH₃ (6 valence electrons), the πu orbitals become occupied upon bending, driving the geometry toward trigonal planar (120°) where the πu set splits into a non‑degenerate a₁′ and a degenerate e′ pair, lowering overall energy. Water (H₂O, 8 valence electrons) occupies the a₁ and b₂ orbitals derived from the πu set, and the bending angle of 104.5° reflects the balance between σ‑bonding stabilisation and lone‑pair repulsion. Photoelectron spectroscopy (PES) validates these orbital energy orderings: the ionisation energies of H₂O show three distinct bands corresponding to the 1b₁ (non‑bonding lone pair), 3a₁ (bonding), and 1b₂ (bonding) orbitals, matching the Walsh‑predicted sequence. For larger polyatomics such as NH₃ and CH₄, group‑theoretical construction of symmetry‑adapted linear combinations (SALCs) yields MO diagrams that explain inversion barriers (NH₃) and the tetrahedral angle (CH₄). In examinations, students may be asked to sketch a qualitative Walsh diagram for a given AH₂ molecule, to rationalise observed bond angles from orbital occupancy, or to interpret a simple PES spectrum in terms of MO ordering.

Hydrogen Bond Cooperativity and Its Role in Supramolecular Chemistry

Hydrogen‑bond cooperativity refers to the phenomenon where the formation of one hydrogen bond enhances the strength of adjacent hydrogen bonds in a network. In water clusters, the average H‑bond energy rises from ≈ 18 kJ mol⁻¹ in the dimer to ≈ 23 kJ mol⁻¹ in the hexamer, a ≈ 30 % increase attributed to charge‑redistribution and polarisation cascades along the chain. This cooperativity underpins the anomalously high boiling point of water (100 °C) relative to H₂S (−60 °C) and explains why ice adopts an open hexagonal lattice with each molecule donating two and accepting two H‑bonds. In biological macromolecules, cooperativity stabilises α‑helices and β‑sheets: each peptide carbonyl‑amide H‑bond polarises the next carbonyl, increasing its basicity and the amide’s acidity, so that a helix of n residues gains roughly (n − 4) × ΔE_coop extra stabilisation. DNA base pairing also exhibits cooperativity; the three H‑bonds in a G·C pair are not simply additive — the central N–H···O bond is strengthened by the flanking N–H···N and O···H–N bonds, contributing to the high melting temperatures of GC‑rich sequences. In supramolecular chemistry, designed H‑bonded arrays (e.g., ureidopyrimidinone dimers) exploit cooperativity to achieve association constants > 10⁶ M⁻¹ in non‑polar solvents. Quantitative treatment uses the “cooperativity factor” α = K_n / (K1)ⁿ, where K_n is the overall equilibrium constant for an n‑mer; α > 1 indicates positive cooperativity. Examination questions may ask to calculate the effective H‑bond energy in a cluster given dimer data, to predict the effect of isotopic substitution (H/D) on cooperativity, or to rationalise why α‑helices are more stable than isolated H‑bonds.

Bonding in Transition Metal Complexes: Ligand Field Theory vs Crystal Field Theory

Crystal Field Theory (CFT) treats metal–ligand interactions as purely electrostatic, splitting the five d‑orbitals of a transition metal ion according to the geometry of the ligand field. In an octahedral field, the d‑orbitals separate into a lower‑energy t₂g set (d_xy, d_xz, d_yz) and a higher‑energy e_g set (d_z², d_x²−y²), with a splitting parameter Δ_o. CFT successfully predicts the colours and magnetic moments of many complexes (e.g., high‑spin [Fe(H₂O)₆]²⁺, Δ_o ≈ 10 400 cm⁻¹, four unpaired electrons). However, CFT cannot account for the spectrochemical series (I⁻ < Br⁻ < Cl⁻ < F⁻ < OH⁻ < H₂O < NH₃ < en < CN⁻ < CO) because it ignores covalent orbital overlap. Ligand Field Theory (LFT) extends CFT by incorporating metal–ligand σ‑ and π‑bonding through molecular orbital construction. σ‑donor ligands raise the e_g* antibonding orbitals, while π‑acceptor ligands (CO, CN⁻) lower the t₂g* orbitals via back‑bonding, increasing Δ_o dramatically (e.g., [Fe(CN)₆]⁴⁻, Δ_o ≈ 33 500 cm⁻¹, low‑spin d⁶, diamagnetic). π‑donor ligands (F⁻, Cl⁻) raise t₂g* and reduce Δ_o, favouring high‑spin configurations. LFT also explains Jahn–Teller distortions: in a d⁹ octahedral complex (Cu²⁺), the uneven e_g occupancy (t₂g⁶ e_g³) leads to an axial elongation that lowers the energy of the d_z² orbital, a prediction confirmed by X‑ray structures of [Cu(H₂O)₆]²⁺. The nephelauxetic effect (reduction of interelectronic repulsion parameter B) quantifies covalency; a large nephelauxetic ratio β = B_complex / B_free ion indicates strong metal–ligand orbital mixing. In examinations, students must differentiate CFT and LFT explanations for colour, magnetism, and the spectrochemical series, calculate crystal‑field stabilisation energies (CFSE) for given d‑electron counts, and predict geometry distortions from Jahn–Teller considerations.

  • Assuming all ionic compounds are purely electrostatic; ignoring Fajan’s polarisation leads to wrong solubility predictions.
  • Treating hypervalent main‑group molecules as sp³d/sp³d² hybrids; modern evidence shows d‑orbitals are not valence contributors.
  • Using the octet rule to judge stability of noble‑gas compounds; XeF₂, XeF₄, XeO₃ are stable despite exceeding eight electrons.
  • Neglecting Walsh diagram orbital‑energy trends when rationalising bent vs linear AH₂ geometries.
  • Overlooking hydrogen‑bond cooperativity; treating each H‑bond as independent underestimates network stability in water, DNA, and proteins.
  • Applying crystal‑field splitting alone to explain the spectrochemical series; ligand‑field π‑back‑bonding is essential for strong‑field ligands.
  • Remember to review these traps before the exam.

Practice Questions

← Atomic Structure & Periodicity Thermodynamics, Equilibrium & Redox →