Thermodynamics, Equilibrium & Redox
Learning Objectives
- Understand the fundamental concepts of Thermodynamics, Equilibrium & Redox
- Apply key formulas and techniques to solve problems
- Practice with exam-level questions to build speed and accuracy
1. Foundations of Thermodynamics
1.1 The Zeroth Law and Thermal Equilibrium
The zeroth law of thermodynamics establishes the concept of temperature by stating that if two systems are each in thermal equilibrium with a third system, they are in thermal equilibrium with each other. This transitive property allows the definition of a temperature scale and makes the thermometer a reliable instrument. In practice, the law underpins the calibration of temperature measuring devices and ensures that temperature is a state function, independent of the path taken to reach equilibrium. Without this principle, the quantitative comparison of thermal states between different bodies would be impossible, and the subsequent laws could not be formulated on a consistent basis.
1.2 The First Law: Energy Conservation
The first law of thermodynamics expresses the conservation of energy for a thermodynamic system, stating that the change in internal energy ΔU equals the heat q added to the system minus the work w done by the system on its surroundings (ΔU = q – w). This relationship applies to any process, whether reversible or irreversible, and it introduces internal energy as a state function that depends only on the current state of the system. In chemistry, the first law is used to calculate enthalpy changes for reactions by measuring heat exchanged at constant pressure, where qₚ = ΔH. The sign convention adopted in chemistry treats heat absorbed by the system as positive and work done by the system as positive, which is essential for consistent bookkeeping in thermochemical equations.
1.3 The Second Law: Entropy and Spontaneity
The second law introduces entropy S as a measure of the dispersal of energy and states that for any spontaneous process the total entropy of the universe increases (ΔS_universe > 0). For a reversible process at constant temperature, the entropy change of the system equals the heat exchanged divided by the temperature (ΔS = q_rev/T). This law provides a criterion for spontaneity that is independent of the first law; a process may conserve energy yet be non‑spontaneous if it leads to a decrease in total entropy. In chemical reactions, the Gibbs free energy G = H – TS combines enthalpy and entropy, and a negative ΔG at constant temperature and pressure signals a spontaneous reaction. The second law also limits the efficiency of heat engines through the Carnot efficiency η = 1 – T_cold/T_hot, a result that has profound implications for energy conversion technologies.
1.4 The Third Law and Absolute Zero
The third law of thermodynamics asserts that the entropy of a perfect crystal approaches zero as the temperature approaches absolute zero (0 K). This principle provides an absolute reference point for entropy, allowing the calculation of absolute entropies of substances from heat‑capacity data. It also implies that absolute zero cannot be reached by any finite number of steps, because removing the last increments of thermal energy would require an infinite number of operations. The third law is essential for the determination of standard molar entropies S° used in the calculation of ΔG° = ΔH° – TΔS° for reactions at standard conditions.
2. Enthalpy and Heat Transfer
2.1 Definition of Enthalpy and Its Relation to Internal Energy
Enthalpy H is defined as H = U + pV, where U is the internal energy, p the pressure, and V the volume of the system. At constant pressure, the heat exchanged qₚ equals the change in enthalpy ΔH, making enthalpy the convenient thermodynamic potential for most laboratory reactions that occur in open vessels. Because both U and pV are state functions, H is also a state function, and its change depends only on the initial and final states. The enthalpy change for a reaction can be expressed as the sum of the standard enthalpies of formation of the products minus those of the reactants, a direct consequence of Hess’s law.
2.2 Hess’s Law and Standard Enthalpies of Formation
Hess’s law states that the total enthalpy change for a reaction is independent of the pathway taken, provided the initial and final states are the same. This principle allows the calculation of ΔH for reactions that are difficult to measure directly by combining known enthalpy changes of simpler steps. Standard enthalpy of formation Δ_fH° is defined as the enthalpy change when one mole of a compound is formed from its constituent elements in their standard states at 1 bar and a specified temperature (usually 298 K). Tabulated Δ_fH° values enable the rapid evaluation of reaction enthalpies for a vast number of chemical processes.
2.3 Calorimetry and Measurement of Heat Effects
Calorimetry is the experimental technique used to measure heat flow associated with chemical or physical processes. In a constant‑pressure calorimeter (often a coffee‑cup calorimeter), the temperature change of a known mass of solution is recorded, and the heat absorbed or released is calculated using q = m c ΔT, where m is the mass, c the specific heat capacity, and ΔT the temperature change. For reactions involving gases or high temperatures, a bomb calorimeter operating at constant volume measures the internal energy change ΔU, from which ΔH can be obtained using ΔH = ΔU + Δn_gas RT. Accurate calorimetric data are the foundation of reliable thermochemical tables.
2.4 Temperature Dependence of Enthalpy: Kirchhoff’s Equation
Kirchhoff’s equation describes how the enthalpy change of a reaction varies with temperature: d(ΔH)/dT = ΔC_p, where ΔC_p is the difference in heat capacities between products and reactants. Integration of this expression between two temperatures yields ΔH(T₂) = ΔH(T₁) + ∫T₁T₂ ΔC_p dT. When ΔC_p is approximately constant over the temperature range, the relationship simplifies to ΔH(T₂) ≈ ΔH(T₁) + ΔC_p (T₂ – T₁). This temperature correction is essential for predicting reaction enthalpies under non‑standard conditions, such as in industrial reactors operating at elevated temperatures.
3. Chemical Equilibrium
3.1 Dynamic Nature of Equilibrium and the Equilibrium Constant
Chemical equilibrium is reached when the forward and reverse reaction rates become equal, resulting in no net change in the concentrations of reactants and products. Although macroscopic properties appear static, the system remains dynamic at the molecular level. The equilibrium constant K_c (in terms of concentrations) or K_p (in terms of partial pressures) quantifies the position of equilibrium. For a generic reaction aA + bB ⇌ cC + dD, K_c = [C]^c[D]^d / ([A]^a[B]^b) where the brackets denote equilibrium molar concentrations. The magnitude of K indicates the extent to which products are favoured; a large K (≫1) means the equilibrium lies far to the right, while a small K (≪1) indicates a reactant‑favoured equilibrium.
3.2 Le Chatelier’s Principle and Its Quantitative Form
Le Chatelier’s principle states that when a system at equilibrium is subjected to a change in temperature, pressure, or concentration, the system shifts in a direction that partially counteracts the imposed change. For concentration changes, the reaction quotient Q is compared with K: if Q < K the forward reaction proceeds to increase product concentrations; if Q > K the reverse reaction dominates. For pressure changes in gaseous equilibria, the shift favours the side with fewer moles of gas. Temperature changes affect K itself; for an exothermic reaction, increasing temperature decreases K, shifting equilibrium toward reactants, whereas for an endothermic reaction K increases with temperature. The quantitative expression of this temperature dependence is given by the van’t Hoff equation.
3.3 Relationship Between ΔG° and K
The standard Gibbs free energy change ΔG° for a reaction is related to the equilibrium constant by ΔG° = –RT ln K, where R is the universal gas constant (8.314 J mol⁻¹ K⁻¹) and T the absolute temperature. This equation links thermodynamics (ΔG°) with the composition of the equilibrium mixture (K). A negative ΔG° corresponds to K > 1, indicating a product‑favoured equilibrium, while a positive ΔG° gives K < 1. At equilibrium, the actual Gibbs free energy change ΔG = ΔG° + RT ln Q becomes zero, which is the condition used to derive the equilibrium constant expression from the reaction quotient.
3.4 Effect of Temperature on Equilibrium: Van’t Hoff Equation
The van’t Hoff equation describes how the equilibrium constant varies with temperature: d(ln K)/dT = ΔH°/(RT²). Integration between two temperatures gives ln(K₂/K₁) = –ΔH°/R (1/T₂ – 1/T₁), assuming ΔH° is temperature‑independent over the interval. This relationship shows that for an exothermic reaction (ΔH° < 0) the equilibrium constant decreases as temperature rises, while for an endothermic reaction (ΔH° > 0) K increases with temperature. The van’t Hoff plot (ln K versus 1/T) yields a straight line whose slope is –ΔH°/R, providing a method to determine reaction enthalpies from equilibrium data.
| Aspect | First Law | Second Law |
|---|---|---|
| Statement | Energy is conserved; ΔU = q – w | Total entropy of the universe increases for spontaneous processes |
| State Function Introduced | Internal energy U | Entropy S |
| Criterion for Spontaneity | None (energy conservation alone does not predict direction) | ΔS_universe > 0 or ΔG < 0 at constant T, p |
| Practical Consequence | Enables calorimetry and enthalpy calculations | Limits efficiency of heat engines; defines direction of natural processes |
4. Ionic Equilibrium and pH
4.1 Acid–Base Theories: Arrhenius, Brønsted–Lowry, Lewis
The Arrhenius theory defines acids as substances that produce H⁺ ions in aqueous solution and bases as substances that produce OH⁻ ions. The Brønsted–Lowry theory broadens this by describing acids as proton donors and bases as proton acceptors, a definition that applies to non‑aqueous solvents and gas‑phase reactions. The Lewis theory further generalises acidity and basicity to electron‑pair acceptors and donors, respectively, encompassing reactions that do not involve proton transfer at all. Each successive theory retains the predictive power of its predecessor while extending the scope to a wider variety of chemical systems.
4.2 Dissociation Constants and the pH Scale
For a weak acid HA ⇌ H⁺ + A⁻, the acid dissociation constant K_a = [H⁺][A⁻]/[HA] quantifies the extent of ionisation. The negative logarithm of the hydrogen‑ion concentration defines pH = –log₁₀[H⁺]; similarly, pK_a = –log₁₀K_a. Strong acids have very large K_a values (effectively infinite) and low pK_a, while weak acids have measurable K_a and higher pK_a. The pH scale is logarithmic, so a change of one pH unit corresponds to a tenfold change in [H⁺]. The ion product of water K_w = [H⁺][OH⁻] = 1.0 × 10⁻¹⁴ at 25 °C links pH and pOH through pH + pOH = 14.00.
4.3 Buffer Solutions and Henderson–Hasselbalch Equation
A buffer solution resists changes in pH upon addition of small amounts of acid or base. It typically consists of a weak acid and its conjugate base (or a weak base and its conjugate acid) in comparable concentrations. The Henderson–Hasselbalch equation, derived from the acid dissociation expression, gives pH = pK_a + log₁₀([A⁻]/[HA]). This equation shows that the buffer pH is determined primarily by the ratio of conjugate base to acid, and that maximum buffering capacity occurs when the ratio is unity (pH = pK_a). Buffer capacity depends on the absolute concentrations of the components; higher concentrations provide greater resistance to pH change.
4.4 Solubility Product and Common‑Ion Effect
For a sparingly soluble salt MₓX_y ⇌ x My+ + y Xx–, the solubility product K_sp = [My+]^x [Xx–]^y represents the equilibrium between the solid and its ions in a saturated solution. The common‑ion effect states that the solubility of a salt decreases when a solution already contains one of its constituent ions, because the equilibrium shifts to the left to maintain K_sp. This principle is exploited in qualitative analysis to precipitate specific ions selectively and in the preparation of pure solids by fractional crystallisation.
| Property | Acid Dissociation Constant K_a | Base Dissociation Constant K_b |
|---|---|---|
| Definition | Equilibrium constant for HA ⇌ H⁺ + A⁻ | Equilibrium constant for B + H₂O ⇌ BH⁺ + OH⁻ |
| Relation to Strength | Large K_a → strong acid | Large K_b → strong base |
| Conjugate Pair Relationship | K_a × K_b = K_w for conjugate acid–base pair | K_a × K_b = K_w for conjugate acid–base pair |
| Typical pK Values | pK_a < 0 for strong acids; 4–10 for weak acids | pK_b < 0 for strong bases; 4–10 for weak bases |
5. Redox Reactions and Electrochemistry
5.1 Oxidation Numbers and Balancing Redox Equations
Oxidation numbers (or oxidation states) are assigned to atoms in a compound according to a set of rules that reflect the distribution of electrons in bonds. An increase in oxidation number corresponds to oxidation (loss of electrons), while a decrease corresponds to reduction (gain of electrons). Balancing redox equations in acidic or basic solution is systematically achieved by the half‑reaction method: separate the overall reaction into oxidation and reduction half‑reactions, balance atoms other than O and H, balance O by adding H₂O, balance H by adding H⁺ (or H₂O/OH⁻ in basic media), balance charge by adding electrons, and finally combine the half‑reactions so that electrons cancel. This method ensures both mass and charge conservation.
5.2 Galvanic Cells, Standard Electrode Potentials, and the Nernst Equation
A galvanic (voltaic) cell converts the chemical energy of a spontaneous redox reaction into electrical energy. It consists of two half‑cells, each containing an electrode immersed in an electrolyte, connected by a salt bridge that maintains charge neutrality. The cell potential E_cell is the difference between the cathode and anode potentials: E_cell = E_cathode – E_anode. Standard electrode potentials E° are measured relative to the standard hydrogen electrode (SHE) under standard conditions (1 M, 1 bar, 298 K). The Nernst equation, E = E° – (RT/nF) ln Q, relates the cell potential to the reaction quotient Q, allowing calculation of potentials under non‑standard conditions. At 298 K, the equation simplifies to E = E° – (0.05916/n) log₁₀Q.
5.3 Gibbs Free Energy and Cell Potential
The electrical work obtainable from a galvanic cell is given by w_elec = –nFE_cell, where n is the number of moles of electrons transferred and F is Faraday’s constant (96 485 C mol⁻¹). Because the maximum non‑expansion work equals the decrease in Gibbs free energy, ΔG = –nFE_cell. Under standard conditions, ΔG° = –nFE°_cell. This relationship provides a direct link between thermodynamic spontaneity (ΔG < 0) and a positive cell potential. It also allows the calculation of equilibrium constants from standard potentials using ΔG° = –RT ln K, yielding ln K = nFE°_cell/(RT).
5.4 Electrolysis and Faraday’s Laws
Electrolysis drives a non‑spontaneous redox reaction by supplying electrical energy. Faraday’s first law states that the amount of substance liberated at an electrode is directly proportional to the quantity of electricity passed: m = (M Q)/(n F), where M is the molar mass, Q the total charge, n the number of electrons per mole of product, and F Faraday’s constant. Faraday’s second law states that the masses of different substances liberated by the same quantity of electricity are proportional to their equivalent weights (M/n). These laws are fundamental for industrial processes such as the production of aluminium, chlorine, and sodium hydroxide, and for quantitative electroplating.
The integration of thermodynamic principles, equilibrium concepts, and redox chemistry provides a unified framework for predicting the direction, extent, and energy changes of chemical processes.
Thermodynamic Cycles and the Carnot Efficiency Limit
A thermodynamic cycle returns a system to its initial state after a series of processes, so the net change in any state function (U, H, S, G) is zero. The first law for a cyclic process reduces to ∮δQ = ∮δW, meaning the net heat absorbed equals the net work done. The second law introduces the Clausius inequality ∮δQ/T ≤ 0, with equality only for a reversible cycle. The Carnot cycle, composed of two isothermal and two adiabatic reversible steps, provides the upper bound for the efficiency of any heat engine operating between two reservoirs at temperatures TH (hot) and TC (cold). Its efficiency is ηCarnot = 1 – TC/TH (temperatures in kelvin). No real engine can exceed this limit because any irreversibility generates entropy, increasing the total entropy of the universe and reducing the work output for the same heat input.
In practice, internal combustion engines, steam turbines, and refrigeration cycles are analysed by comparing their actual efficiency to the Carnot efficiency at the same temperature limits. The ratio ηactual/ηCarnot is called the second‑law efficiency and quantifies how closely a device approaches the reversible ideal. For a refrigerator or heat pump, the coefficient of performance (COP) is bounded by the Carnot COP: COPCarnot,ref = TC/(TH – TC) and COPCarnot,hp = TH/(TH – TC). Real cycles such as the Rankine, Brayton, and vapour‑compression cycles incorporate irreversibilities (finite temperature differences, friction, pressure drops) that lower both efficiency and COP. Exergy analysis, which measures the maximum useful work obtainable as a system comes to equilibrium with the environment, extends the Carnot concept to non‑cyclic processes and provides a common metric for comparing diverse energy conversion technologies.
Key exam points: (1) Carnot efficiency depends only on the absolute temperatures of the reservoirs, not on the working substance. (2) Any claim of an engine exceeding Carnot efficiency violates the second law. (3) The Kelvin‑Planck statement (no process can convert heat completely into work) and the Clausius statement (heat cannot spontaneously flow from cold to hot) are equivalent formulations that both lead to the Carnot limit. (4) In problems, always convert Celsius to kelvin before applying the Carnot formula; a common error is using °C directly, which yields a negative or >1 efficiency.
Non‑Ideal Solutions: Activity Coefficients and the Debye–Hückel Theory
Real solutions deviate from ideal behaviour because of intermolecular forces, especially electrostatic interactions between ions. The thermodynamic activity ai of species i replaces concentration in equilibrium expressions: ai = γi·ci/c°, where γi is the activity coefficient and c° = 1 mol L⁻¹ is the standard state. For an ideal dilute solution γi → 1. In electrolyte solutions, the mean ionic activity coefficient γ± for a salt Mν+Xν– is defined by γ± = (γ+ν+·γ–ν–)1/(ν+ + ν–). The Debye–Hückel limiting law gives the first theoretical estimate for γ± at very low ionic strength I: log₁₀γ± = –A·|z+z–|·√I, where A ≈ 0.509 mol⁻¹ᐟ² L¹ᐟ² at 298 K for water, z are ionic charges, and I = ½∑cizi². This law works only up to I ≈ 0.01 M.
Extended Debye–Hückel and Davies equations incorporate an ion‑size parameter a (effective hydrated radius) and an empirical linear term to cover moderate ionic strengths (up to ~0.5 M): log₁₀γ± = –A·|z+z–|·√I/(1 + B·a·√I) + b·I. Here B ≈ 0.328 Å⁻¹ mol⁻¹ᐟ² L¹ᐟ² and b ≈ 0.1–0.3. For concentrated solutions (>1 M), specific ion interaction models (Pitzer equations) or empirical tables are required. Activity coefficients directly affect solubility products, acid‑base equilibria, and electrode potentials via the Nernst equation. For example, the measured pH of a 0.1 M HCl solution is about 1.08, not 1.00, because γH⁺ ≈ 0.83. Ignoring activity leads to systematic errors in quantitative analysis and in the calculation of ΔG from equilibrium constants.
Exam focus: (1) Write the expression for ionic strength and compute it for mixed electrolytes. (2) Apply the limiting law to estimate γ± for a 1:1 electrolyte at I = 0.001 M. (3) Recognise that the Debye–Hückel law predicts γ± < 1 for all finite I, and that γ± can exceed 1 only in very concentrated non‑aqueous media where specific interactions dominate. (4) Distinguish between the mean activity coefficient of a salt and the individual ion coefficients, which cannot be measured separately without a convention (the MacInnes convention).
Temperature Dependence of Equilibrium Constants: Van’t Hoff Analysis and Heat Capacity Effects
The Van’t Hoff equation d(ln K)/dT = ΔH°/(RT²) follows from the Gibbs‑Helmholtz relation and assumes ΔH° is temperature‑independent. Integrating between T₁ and T₂ gives ln(K₂/K₁) = –ΔH°/R·(1/T₂ – 1/T₁). A plot of ln K versus 1/T (Van’t Hoff plot) yields a straight line of slope –ΔH°/R if ΔH° is constant. In reality, ΔH° varies with temperature according to Kirchhoff’s law: ΔH°(T₂) = ΔH°(T₁) + ∫T₁T₂ ΔCp° dT, where ΔCp° = ΣνiCp,i° (products – reactants). If ΔCp° is non‑zero, the Van’t Hoff plot curves. For many reactions ΔCp° is small over a modest temperature range, so the linear approximation is acceptable. However, for reactions involving phase changes or large changes in molecular complexity (e.g., polymerisation, protein denaturation), ΔCp° can be significant and must be included.
When ΔCp° is assumed constant, integration gives ΔH°(T) = ΔH°(T₀) + ΔCp°(T – T₀) and ΔS°(T) = ΔS°(T₀) + ΔCp°·ln(T/T₀). Substituting into ΔG° = ΔH° – TΔS° yields a temperature‑dependent K that can be fitted to experimental data to extract ΔH°, ΔS°, and ΔCp° simultaneously. This three‑parameter fit is standard in biophysical chemistry for determining the thermodynamics of ligand binding and protein folding. The sign of ΔCp° provides structural insight: a large negative ΔCp° often indicates burial of non‑polar surface area upon binding.
Exam traps: (1) Using the simple Van’t Hoff equation when the problem states that ΔH° varies with temperature. (2) Forgetting to convert ΔH° from kJ mol⁻¹ to J mol⁻¹ before dividing by R = 8.314 J mol⁻¹ K⁻¹. (3) Misinterpreting the slope of a ln K vs 1/T plot as –ΔH°/R when the data are actually ln K vs T (the slope then has different units). (4) Assuming ΔCp° = 0 for gas‑phase reactions where the number of moles changes; even then, ΔCp° may be non‑zero because heat capacities of reactants and products differ.
Redox Titrations: Potentiometric End‑Point Detection and the Nernst Equation in Practice
In a redox titration, the potential of an indicator electrode (often Pt) immersed in the analyte solution follows the Nernst equation for the redox couple being titrated. For the half‑reaction Ox + ne⁻ ⇌ Red, the electrode potential is E = E° – (0.05916/n)·log₁₀([Red]/[Ox]) at 298 K. As titrant is added, the ratio [Red]/[Ox] changes gradually, then sharply near the equivalence point where the stoichiometric amounts of oxidant and reductant are equal. The titration curve (E vs volume) exhibits a steep inflection; the end point is taken at the maximum of the first derivative dE/dV or the zero of the second derivative d²E/dV². The magnitude of the potential jump depends on the formal potentials of the two couples, the number of electrons transferred, and the concentrations. A larger difference in formal potentials (>0.2 V) and higher concentrations give a sharper end point.
For a titration of Fe²⁺ with Ce⁴⁺ (E°(Ce⁴⁺/Ce³⁺) = +1.61 V, E°(Fe³⁺/Fe²⁺) = +0.77 V), the potential before equivalence is governed by the Fe³⁺/Fe²⁺ couple, after equivalence by the Ce⁴⁺/Ce³⁺ couple. At the equivalence point, the potential is the weighted average: Eeq = (n₁E°₁ + n₂E°₂)/(n₁ + n₂) (for n₁ = n₂ = 1, Eeq = 1.19 V). The Nernst equation also allows calculation of the titration error if the end point is detected at a potential slightly offset from Eeq. In practice, a redox indicator (e.g., ferroin, diphenylamine) changes colour near a specific potential, providing a visual end point that approximates the potentiometric one. The indicator’s transition range must lie within the steep portion of the curve.
Key quantitative skills: (1) Derive the expression for E as a function of titrant volume V for both pre‑ and post‑equivalence regions. (2) Compute the equivalence‑point potential for couples with different n values (e.g., MnO₄⁻/Mn²⁺, n = 5). (3) Estimate the titration error from a given indicator transition potential. (4) Recognise that the Nernst equation uses activities; in concentrated solutions, activity coefficients must be included or a formal potential E°′ (conditional on the medium) used.
Electrochemical Series and Predicting Spontaneity in Complex Media
The standard electrochemical series lists half‑reactions in order of decreasing standard reduction potential E°. A species higher in the series (more positive E°) is a stronger oxidising agent; a species lower (more negative E°) is a stronger reducing agent. For any spontaneous redox reaction under standard conditions, the cell potential E°cell = E°cathode – E°anode must be positive. However, real systems rarely operate at standard state. The Nernst equation adjusts each half‑cell potential for actual activities: E = E° – (0.05916/n)·log₁₀Q. In complex media (e.g., biological fluids, seawater, molten salts), complex formation, precipitation, and changes in dielectric constant shift formal potentials dramatically. For instance, the Fe³⁺/Fe²⁺ couple has E° = +0.77 V, but in the presence of excess CN⁻ the formation of [Fe(CN)₆]³⁻/⁴⁻ shifts the formal potential to +0.36 V, altering the redox hierarchy.
Pourbaix (E–pH) diagrams extend the electrochemical series by mapping the thermodynamic stability regions of species as a function of both potential and pH. They are constructed from the Nernst equations for all relevant half‑reactions, including water oxidation/reduction lines (E = 1.23 – 0.0591·pH for O₂/H₂O and E = –0.0591·pH for H⁺/H₂). These diagrams predict corrosion behaviour, passivation, and the feasibility of electrochemical synthesis in aqueous environments. In non‑aqueous solvents, the solvent’s own redox limits (e.g., acetonitrile oxidation at +2.5 V vs SHE) replace the water lines. The concept of “electrochemical window” defines the potential range where the solvent is inert; choosing a solvent with a wide window (e.g., ionic liquids) enables the study of highly reducing or oxidising species that would decompose water.
Exam focus: (1) Given a list of half‑reactions with E° values, rank them as oxidising/reducing agents. (2) Calculate the cell potential for a reaction in a non‑standard solution using the Nernst equation, including activity coefficients if provided. (3) Interpret a Pourbaix diagram to identify the conditions under which a metal is immune, corrodes, or passivates. (4) Explain how complexation changes the effective reduction potential and why this matters in analytical chemistry (e.g., EDTA titration of metal ions monitored potentiometrically).
- Assuming ΔH° is constant over a wide temperature range when ΔCp° is significant.
- Using concentrations instead of activities in the Nernst equation for solutions with I > 0.01 M.
- Confusing the sign convention for E°cell (cathode minus anode) with the algebraic sum of half‑cell potentials.
- Neglecting the temperature conversion to kelvin in Carnot efficiency and Van’t Hoff calculations.
- Treating the Debye–Hückel limiting law as valid up to 0.1 M ionic strength.
- Forgetting that the equivalence‑point potential in a redox titration depends on the electron stoichiometry of both couples.
- Overlooking the shift of formal potentials by complexation when predicting spontaneity from the standard electrochemical series.