Organic Chemistry Basics & Hydrocarbons
Learning Objectives
- Understand the fundamental concepts of Organic Chemistry Basics & Hydrocarbons
- Apply key formulas and techniques to solve problems
- Practice with exam-level questions to build speed and accuracy
Foundations of Organic Chemistry
1.1 The Carbon Skeleton and Tetravalency
Organic chemistry is built upon the unique ability of carbon to form four covalent bonds, a consequence of its four valence electrons and the relatively small energy gap between the 2s and 2p orbitals. This tetravalency allows carbon atoms to link with each other in chains, branches, and rings, creating an essentially infinite variety of molecular frameworks. The strength of the carbon–carbon single bond (approximately 347 kJ mol⁻¹) and the carbon–hydrogen bond (approximately 413 kJ mol⁻¹) provides the thermodynamic stability that makes organic compounds both abundant and chemically versatile. Because each carbon can adopt sp³, sp², or sp hybridisation, the geometry around carbon can be tetrahedral, trigonal planar, or linear, respectively, and this geometric diversity underpins the three‑dimensional shapes that dictate reactivity and physical properties.
1.2 Hybridisation and Bonding in Hydrocarbons
In alkanes every carbon is sp³ hybridised, giving rise to sigma (σ) bonds only and a tetrahedral bond angle of 109.5°. Alkenes contain at least one carbon–carbon double bond; each doubly bonded carbon is sp² hybridised, forming three σ bonds in a trigonal planar arrangement and one π bond that results from the side‑on overlap of the remaining unhybridised p orbitals. Alkynes feature a carbon–carbon triple bond where each carbon is sp hybridised, producing two σ bonds in a linear geometry and two orthogonal π bonds. Aromatic hydrocarbons such as benzene possess a delocalised π system in which each carbon is sp² hybridised, but the six π electrons are shared over the ring, granting extra stability described by Hückel’s 4n + 2 rule. The progressive increase in s‑character from sp³ to sp leads to shorter, stronger σ bonds and higher electronegativity of the carbon atom, which in turn influences acidity of terminal alkynes and the reactivity of the π system.
1.3 Classification of Hydrocarbons
Hydrocarbons are classified primarily by the nature of the carbon–carbon bonds present. Saturated hydrocarbons, the alkanes, contain only single bonds and follow the general formula CₙH₂ₙ₊₂ for acyclic members. Unsaturated hydrocarbons include alkenes (CₙH₂ₙ) with at least one double bond, alkynes (CₙH₂ₙ₋₂) with at least one triple bond, and aromatic hydrocarbons that contain a conjugated cyclic π system, the simplest being benzene (C₆H₆). Cycloalkanes are saturated rings with formula CₙH₂ₙ, while cycloalkenes and cycloalkynes incorporate unsaturation within a ring. The degree of unsaturation, also called the index of hydrogen deficiency, can be calculated from the molecular formula and provides a quick check on the number of rings and multiple bonds present in an unknown structure.
IUPAC Nomenclature of Hydrocarbons
2.1 Principles of the IUPAC System
The International Union of Pure and Applied Chemistry (IUPAC) nomenclature provides a systematic method to name every organic compound uniquely. The system is based on three hierarchical decisions: identification of the longest continuous carbon chain (the parent), numbering of that chain to give the lowest set of locants to substituents and multiple bonds, and citation of substituents, functional groups, and unsaturation in alphabetical order with appropriate prefixes and suffixes. The parent name derives from the number of carbon atoms (meth‑, eth‑, prop‑, but‑, pent‑, hex‑, hept‑, oct‑, non‑, dec‑) and the saturation level (‑ane, ‑ene, ‑yne). When both double and triple bonds are present, the suffixes are combined as ‑en‑yne, and the chain is numbered to give the lowest possible numbers to the multiple bonds considered together, with double bonds receiving priority over triple bonds only when a tie exists.
2.2 Naming Substituted Alkanes and Cycloalkanes
For a branched alkane the longest chain is selected; if two chains of equal length exist, the one with the greater number of substituents is chosen. Substituents are named by replacing the ‑ane ending of the corresponding alkane with ‑yl (methyl, ethyl, propyl, etc.). The positions of substituents are indicated by locants placed before the substituent name, separated by commas, and the whole substituent list is preceded by the parent name without a space (e.g., 2,3‑dimethylpentane). In cycloalkanes the ring itself is the parent; the prefix “cyclo‑” is added to the alkane name (cyclopentane). Numbering of a monosubstituted cycloalkane starts at the substituted carbon, while for polysubstituted rings the numbering proceeds around the ring to give the lowest set of locants, applying the “first point of difference” rule.
2.3 Nomenclature of Alkenes, Alkynes, and Aromatics
Alkenes receive the suffix ‑ene; the position of the double bond is indicated by the lower‑numbered carbon of the double bond (e.g., pent‑2‑ene). If more than one double bond exists, the suffix becomes ‑diene, ‑triene, etc., and each double bond receives a locant (e.g., hexa‑1,3‑diene). Alkynes are named analogously with the suffix ‑yne (e.g., but‑1‑yne). When both double and triple bonds are present, the compound is an enyne; the chain is numbered to give the lowest set of locants to the multiple bonds considered together, and the “ene” part is cited before “yne” (e.g., hex‑3‑en‑1‑yne). Aromatic hydrocarbons retain the traditional names for the simplest members (benzene, toluene, xylene, naphthalene) but systematic names are also permitted (e.g., methylbenzene for toluene). Substituents on an aromatic ring are indicated by locants (ortho, meta, para are discouraged in systematic nomenclature) and the ring is numbered to give the lowest numbers to the substituents.
Isomerism in Hydrocarbons
3.1 Structural (Constitutional) Isomerism
Structural isomers have the same molecular formula but differ in the connectivity of atoms. In alkanes, chain isomerism arises from different carbon skeletons (e.g., n‑pentane versus isopentane versus neopentane). Position isomerism occurs when a functional group or multiple bond occupies different positions on the same carbon skeleton (e.g., pent‑1‑ene versus pent‑2‑ene). Functional group isomerism is not observed within pure hydrocarbons because the only functional groups are the carbon–carbon multiple bonds themselves; however, cycloalkanes and alkenes can be functional‑group isomers of each other (e.g., cyclopentane C₅H₁₀ and pent‑1‑ene C₅H₁₀). The number of possible structural isomers grows rapidly with carbon count; for C₁₀H₂₂ there are 75 distinct alkane isomers, illustrating the combinatorial richness of carbon chemistry.
3.2 Stereoisomerism: Geometric (cis‑trans) Isomerism
Geometric isomerism arises when rotation about a bond is restricted, most commonly across a carbon–carbon double bond or within a ring. For an alkene to exhibit cis‑trans isomerism, each doubly bonded carbon must bear two different substituents. The cis isomer has the higher‑priority groups on the same side of the double bond, while the trans isomer has them on opposite sides. The Cahn‑Ingold‑Prelog (CIP) priority rules assign priority based on atomic number of the atoms directly attached to the double‑bonded carbons; this system extends to E/Z notation, which is unambiguous for all substituted alkenes. In cycloalkanes, cis‑trans isomerism describes the relative orientation of substituents on the ring (both up or both down versus one up one down). The energy barrier for interconversion is high because it would require breaking the π bond or severely distorting the ring, so the isomers are isolable at room temperature.
3.3 Optical Isomerism and Chirality in Hydrocarbons
Optical isomerism (enantiomerism) requires a chiral centre, typically a carbon bearing four different substituents. While simple alkanes rarely possess such centres, substituted alkenes, alkynes, and especially polycyclic aromatic systems can become chiral through axial chirality (e.g., allenes with cumulated double bonds) or helical chirality (e.g., helicenes). An allene (C=C=C) with different substituents on the terminal carbons is chiral because the two π bonds lie in perpendicular planes, creating a non‑superimposable mirror image. The specific rotation of each enantiomer is equal in magnitude but opposite in sign. Racemic mixtures contain equal amounts of both enantiomers and are optically inactive. Resolution of enantiomers can be achieved by formation of diastereomeric derivatives with a chiral resolving agent, followed by separation and regeneration of the pure enantiomers.
| Isomerism Type | Origin | Typical Example | Interconversion Barrier |
|---|---|---|---|
| Chain (skeletal) | Different carbon skeleton | n‑Butane vs isobutane | Requires bond breaking |
| Position | Different location of multiple bond or substituent | Pent‑1‑ene vs pent‑2‑ene | Requires bond migration |
| Geometric (cis‑trans/E‑Z) | Restricted rotation about double bond or ring | cis‑2‑Butene vs trans‑2‑Butene | High (π bond) |
| Optical (enantiomerism) | Chiral centre or axial/helical chirality | Substituted allene (R‑ and S‑) | Very high (no bond breaking) |
Reaction Mechanisms Fundamental to Hydrocarbon Chemistry
4.1 Homolytic and Heterolytic Bond Cleavage
Chemical reactions of hydrocarbons proceed through either homolytic or heterolytic cleavage of covalent bonds. Homolytic fission splits a bond evenly, each atom retaining one electron, generating radicals (species with an unpaired electron). This pathway dominates in high‑temperature or photochemical processes such as the chlorination of methane, where a chlorine radical abstracts a hydrogen atom to give a methyl radical, which then couples with another chlorine radical. Heterolytic fission assigns both bonding electrons to one atom, producing a cation and an anion; this is typical in polar reactions involving electrophiles and nucleophiles, for example the addition of HBr to an alkene via a carbocation intermediate. The relative stability of the resulting intermediates—radicals, carbocations, carbanions—governs which pathway is favoured under a given set of conditions.
4.2 Carbocation Stability and Rearrangements
Carbocations are electron‑deficient species with a positively charged carbon bearing only six valence electrons. Their stability follows the order tertiary > secondary > primary > methyl, a trend explained by hyperconjugation and inductive donation from adjacent alkyl groups. Allylic and benzylic carbocations enjoy additional resonance stabilisation, making them unusually stable even when formally primary. Because carbocations can undergo rapid 1,2‑hydride or 1,2‑alkyl shifts to form a more stable cation, reaction pathways often involve rearrangements. For instance, the acid‑catalysed dehydration of 3‑methyl‑2‑butanol proceeds via a secondary carbocation that rearranges to a more stable tertiary carbocation before elimination yields the more substituted alkene (Zaitsev product). Recognising possible rearrangements is essential for predicting the major product in addition, elimination, and substitution reactions of hydrocarbons.
4.3 Radical Chain Mechanisms: Initiation, Propagation, Termination
Radical halogenation of alkanes exemplifies a chain mechanism. Initiation requires an energy input (UV light or heat) to homolytically cleave the halogen molecule (Cl₂ → 2 Cl·). Propagation steps involve the radical abstracting a hydrogen atom from the alkane (Cl· + RH → HCl + R·) followed by the carbon radical reacting with another halogen molecule (R· + Cl₂ → RCl + Cl·), regenerating the chlorine radical. The chain continues until termination steps combine two radicals (Cl· + Cl· → Cl₂, R· + Cl· → RCl, R· + R· → R‑R). The selectivity of hydrogen abstraction follows the stability order of the resulting carbon radical (tertiary > secondary > primary), which mirrors carbocation stability. Consequently, chlorination of 2‑methylbutane yields a mixture dominated by the tertiary chloride, whereas bromination, being more selective, gives an even higher proportion of the tertiary bromide.
4.4 Electrophilic Aromatic Substitution (EAS) Mechanism
Aromatic hydrocarbons undergo substitution rather than addition because addition would destroy the aromatic π system and its associated stabilization energy (≈ 150 kJ mol⁻¹). In electrophilic aromatic substitution, a strong electrophile (e.g., NO₂⁺ in nitration, Cl⁺ in chlorination) attacks the π cloud, forming a resonance‑stabilised σ‑complex (Wheland intermediate) in which the positive charge is delocalised over the ring. Deprotonation at the carbon bearing the electrophile restores aromaticity and yields the substituted product. The rate‑determining step is the formation of the σ‑complex; substituents already present on the ring influence both the rate and the position of further substitution. Electron‑donating groups (alkyl, –OH, –OR) activate the ring and direct ortho/para, while electron‑withdrawing groups (–NO₂, –COOH, –SO₃H) deactivate and direct meta. Understanding these directing effects is crucial for planning multi‑step syntheses of aromatic compounds.
| Mechanism | Typical Substrate | Key Intermediate | Rate‑Determining Step | Selectivity Control |
|---|---|---|---|---|
| Free‑radical halogenation | Alkanes | Carbon radical | Hydrogen abstraction | Radical stability (3° > 2° > 1°) |
| Electrophilic addition to alkenes | Alkenes | Carbocation | Carbocation formation | Markovnikov rule (more stable carbocation) |
| Electrophilic aromatic substitution | Aromatics | σ‑Complex (Wheland) | σ‑Complex formation | Substituent directing effects |
| Nucleophilic substitution (SN1) | Allylic/benzylic halides | Carbocation | Ionisation of C–X bond | Carbocation stability |
Chemistry of Alkanes, Alkenes, Alkynes, and Aromatic Hydrocarbons
5.1 Physical Properties and Trends
Alkanes are non‑polar molecules whose only intermolecular forces are London dispersion forces; consequently, boiling points increase smoothly with molecular weight and surface area. Branching reduces surface contact, lowering boiling points (e.g., n‑pentane 36 °C vs neopentane 9.5 °C). Alkenes and alkynes have slightly higher polarity due to the π bond, giving marginally higher boiling points than the corresponding alkanes of equal carbon number. Aromatic hydrocarbons are planar and possess a delocalised π cloud, leading to stronger π‑π stacking interactions; benzene boils at 80 °C, higher than cyclohexane (81 °C) despite having fewer electrons, because the quadrupole moment enhances intermolecular attraction. All hydrocarbons are essentially insoluble in water but dissolve readily in non‑polar organic solvents.
5.2 Characteristic Reactions of Alkanes
Alkanes are relatively inert under ambient conditions because all bonds are strong σ bonds. The most important reaction is free‑radical halogenation, which proceeds via the chain mechanism described earlier. Combustion in excess oxygen yields carbon dioxide and water, releasing large amounts of heat (ΔH_combustion ≈ ‑4700 kJ mol⁻¹ for octane). Catalytic cracking at high temperature breaks larger alkanes into smaller, more valuable alkenes and alkanes, a cornerstone of petroleum refining. Isomerisation over acidic catalysts (e.g., Pt/Al₂O₃) converts straight‑chain alkanes into branched isomers to improve octane rating. Dehydrogenation of alkanes to alkenes (e.g., propane → propene) is achieved industrially using chromium oxide or platinum catalysts at 500–600 °C.
5.3 Reactivity of Alkenes: Addition Reactions
The π bond of alkenes is a region of high electron density, making alkenes nucleophilic toward electrophiles. Hydrogen halides add across the double bond following Markovnikov’s rule: the hydrogen attaches to the carbon bearing more hydrogens, generating the more stable carbocation intermediate. In the presence of peroxides, HBr adds via a radical chain mechanism giving anti‑Markovnikov product (Kharasch addition). Halogen addition (Br₂, Cl₂) proceeds through a cyclic halonium ion, giving vicinal dihalides with anti stereochemistry. Hydration (acid‑catalysed addition of water) yields alcohols, while hydroboration‑oxidation provides anti‑Markovnikov alcohols with syn addition. Catalytic hydrogenation (H₂, Pd/C) reduces the double bond to a single bond, a reaction that is stereospecifically syn. Ozonolysis cleaves the double bond, producing carbonyl compounds (aldehydes or ketones) after reductive work‑up (Zn/AcOH) or oxidative work‑up (H₂O₂).
5.4 Reactivity of Alkynes: Addition and Acidity
Alkynes possess two π bonds; the first addition reaction often stops at the alkene stage if a bulky reagent or a poisoned catalyst (Lindlar’s catalyst) is used, giving cis‑alkenes. Full catalytic hydrogenation with Pd/C yields alkanes. Halogen addition can add one or two equivalents, giving vicinal dihalides or tetrahalides. Hydrogen halides add twice; the first addition follows Markovnikov orientation, and the second addition yields a geminal dihalide. Terminal alkynes are unusually acidic (pK_a ≈ 25) because the sp‑hybridised carbon holds the negative charge in an orbital with 50 % s‑character, stabilising the acetylide anion. Deprotonation with strong bases (NaNH₂, n‑BuLi) generates nucleophilic acetylides that undergo SN2 reactions with alkyl halides, enabling carbon‑carbon bond formation. Oxidative cleavage with hot KMnO₄ or ozonolysis yields carboxylic acids (or carbon dioxide for terminal alkynes).
5.5 Aromatic Hydrocarbons: Stability and Substitution
Benzene’s exceptional stability arises from the cyclic delocalisation of six π electrons, satisfying Hückel’s 4n + 2 rule (n = 1). This aromatic stabilization energy makes addition reactions thermodynamically unfavourable; instead, electrophilic aromatic substitution preserves the aromatic sextet. Nitration (conc. HNO₃/H₂SO₄) introduces a nitro group, sulfonation (fuming H₂SO₄) gives a sulfonic acid, halogenation (Cl₂/FeCl₃) yields chlorobenzene, and Friedel‑Crafts alkylation/acylation (R‑Cl/AlCl₃ or RCOCl/AlCl₃) attach alkyl or acyl groups. The directing effects of existing substituents dictate the position of the incoming electrophile: activating groups (alkyl, –OH, –NH₂) are ortho/para directors, while deactivating groups (–NO₂, –COOH, –SO₃H) are meta directors, except halogens which are deactivating yet ortho/para directing due to resonance donation. Polycyclic aromatic hydrocarbons such as naphthalene and anthracene exhibit similar chemistry but with increased reactivity at the α‑positions. Understanding these patterns enables the rational synthesis of complex aromatic molecules used in pharmaceuticals, dyes, and polymers.
The systematic study of nomenclature, isomerism, reaction mechanisms, and the distinct chemical behaviour of each hydrocarbon class provides the conceptual framework required to predict structures, design syntheses, and rationalise the vast diversity of organic compounds encountered in advanced chemistry.
Regioselectivity and Stereoselectivity in Alkene Addition Reactions
Addition to a carbon–carbon double bond can generate two new σ bonds. The orientation of the incoming groups (regioselectivity) and their relative three‑dimensional arrangement (stereoselectivity) are governed by the nature of the electrophile, the reaction medium, and the stability of the intermediate. In electrophilic addition of HX to an unsymmetrical alkene, the proton adds to the carbon bearing the greater number of hydrogens, producing the more substituted carbocation; this is the classic Markovnikov rule. When a peroxide initiator is present, HBr adds by a radical chain mechanism and the bromine atom attaches to the less substituted carbon, giving the anti‑Markovnikov product (Kharasch addition). Halogen addition (Br₂, Cl₂) proceeds through a cyclic halonium ion; nucleophilic attack by the halide occurs from the backside, delivering anti addition and a vicinal dihalide with defined stereochemistry. Hydroboration‑oxidation employs syn addition of boron and hydrogen across the double bond; oxidation with H₂O₂/NaOH replaces boron by hydroxyl with retention of configuration, furnishing anti‑Markovnikov alcohols. Catalytic hydrogenation (H₂, Pd/C) is also syn, delivering both hydrogens to the same face of the former π bond. Ozonolysis followed by reductive work‑up (Zn/AcOH) cleaves the double bond to carbonyl compounds, while oxidative work‑up (H₂O₂) yields carboxylic acids. The stereochemical outcome of each pathway can be predicted by drawing the relevant intermediate (carbocation, halonium ion, borane complex) and applying the principle of least‑motion or backside attack.
Key Factors Influencing Selectivity
- Substituent electronic effects – electron‑donating alkyl groups stabilise adjacent carbocations, directing protonation to the more substituted carbon.
- Steric hindrance – bulky reagents (e.g., t‑BuOOH in radical addition) favour approach to the less hindered carbon.
- Reaction medium – polar protic solvents stabilise ionic intermediates, enhancing Markovnikov pathways; non‑polar solvents favour radical chains.
- Catalyst/ligand environment – chiral ligands on transition‑metal catalysts can induce enantioselective hydrogenation.
Predictive Workflow
- Identify the alkene substitution pattern.
- Choose the reagent class (electrophilic, radical, concerted).
- Draw the key intermediate (carbocation, halonium, borane).
- Apply stereoelectronic rules (backside attack, syn delivery).
- Assign absolute configuration if a chiral centre is created.
Carbocation Rearrangements: Hydride and Alkyl Shifts
Carbocations are electron‑deficient sp² centres that readily undergo 1,2‑shifts of adjacent σ bonds to generate a more stable cation. A hydride shift moves a hydrogen with its bonding electrons from a neighbouring carbon to the cationic centre; an alkyl shift transfers a carbon group (methyl, ethyl, etc.) in the same fashion. The driving force is the increase in substitution level: primary → secondary → tertiary → resonance‑stabilised (allylic, benzylic). The Wagner‑Meerwein rearrangement exemplifies a skeletal reorganisation where a bridgehead carbocation in a bicyclic system undergoes a series of alkyl shifts to relieve angle strain. In solvolysis of neopentyl halides, a primary carbocation is never observed; instead a rapid 1,2‑methyl shift yields a tertiary cation that captures solvent. Rearrangements are concerted with nucleophilic capture when the nucleophile is present in high concentration, but they can also be intercepted by elimination to give alkenes (E1 pathway). The rate of a shift correlates with the ability of the migrating group to donate electron density; hydride shifts are generally faster than alkyl shifts because the C–H bond is more polarizable. Isotopic labelling (deuterium at the migration origin) provides kinetic isotope evidence for the concerted nature of the shift. In synthetic planning, anticipating rearrangements is crucial: a substrate that would form a less stable cation may be redirected by using a non‑rearranging leaving group (e.g., triflate) or by employing a neighbouring‑group participation strategy.
Common Rearrangement Patterns
| Starting Cation | Migrating Group | Product Cation | Stability Gain |
|---|---|---|---|
| Primary (CH₃CH₂⁺) | Hydride | Secondary (CH₃CH⁺CH₃) | +1 substitution level |
| Secondary (CH₃CH⁺CH₂CH₃) | Methyl | Tertiary (CH₃C⁺(CH₃)CH₂CH₃) | +1 substitution level |
| Allylic (CH₂=CH‑CH₂⁺) | Hydride | Resonance‑stabilised allylic | Delocalisation over three carbons |
| Bridgehead bicyclic | Alkyl (Wagner‑Meerwein) | Less strained tertiary | Relief of angle strain + substitution |
Experimental Probes
- Deuterium labelling at the migration origin – observation of D incorporation at the new cationic centre confirms a 1,2‑shift.
- Rate comparison of solvolysis for substrates that can vs. cannot rearrange – accelerated rates indicate rearrangement.
- Trapping with a strong nucleophile (e.g., azide) at low temperature – product distribution reveals the rearranged cation.
Directing Effects and Limitations in Electrophilic Aromatic Substitution
Electrophilic aromatic substitution (EAS) proceeds through a σ‑complex (Wheland intermediate) in which the aromatic sextet is temporarily lost. The position of attack is dictated by the electronic nature of substituents already present on the ring. Activating groups donate electron density by resonance (+R) or hyperconjugation (+I), stabilising the σ‑complex at ortho and para positions; they are ortho/para directors and accelerate the reaction relative to benzene. Typical activators include alkyl, –OH, –OR, –NH₂, –NHR, –NR₂. Deactivating groups withdraw electron density (–I, –R), destabilising the σ‑complex; they are meta directors because the ortho and para σ‑complexes place a positive charge directly on the carbon bearing the withdrawing group. Common deactivators are –NO₂, –CF₃, –SO₃H, –COOH, –COOR, –CN. Halogens are unique: they are deactivating by –I but donate by +R, making them ortho/para directors despite overall rate retardation. Steric hindrance can override electronic preferences; bulky electrophiles (e.g., t‑BuCl/AlCl₃) give predominantly para products even with ortho/para directors. Friedel‑Crafts alkylation suffers from polyalkylation and carbocation rearrangements; acylation avoids rearrangement because the acylium ion (R‑C≡O⁺) is resonance‑stabilised and does not rearrange. However, acylation deactivates the ring, preventing further substitution. Strongly deactivated rings (e.g., nitrobenzene) do not undergo Friedel‑Crafts reactions at all. Sulfonation is reversible; heating the sulfonated product in dilute acid regenerates the parent arene, a useful protecting‑group strategy. Nitration of phenol requires careful temperature control to avoid oxidation; the –OH group strongly activates the ring, giving a mixture of ortho and para nitrophenols. Understanding these nuances allows the chemist to plan multi‑step syntheses with predictable regioselectivity.
Directing‑Effect Summary Table
| Group | Electronic Effect | Activation | Directing |
|---|---|---|---|
| –CH₃, –CH₂CH₃ | +I, hyperconjugation | Activating | ortho/para |
| –OH, –OR | +R > –I | Strongly activating | ortho/para |
| –NH₂, –NHR, –NR₂ | +R > –I | Strongly activating | ortho/para |
| –Cl, –Br | –I > +R | Deactivating | ortho/para |
| –NO₂, –CF₃, –SO₃H, –COOH, –CN | –I, –R | Deactivating | meta |
Practical Limitations
- Polyalkylation in Friedel‑Crafts alkylation – use excess arene or switch to acylation‑reduction sequence.
- Carbocation rearrangement – prefer acylation or use stable tertiary halides.
- Deactivated rings – avoid Friedel‑Crafts; consider nucleophilic aromatic substitution if a good leaving group is present.
- Reversible sulfonation – exploit for temporary blocking of a position.
Polymerization of Alkenes: Ziegler‑Natta and Metallocene Catalysis
The industrial production of polyethylene and polypropylene relies on coordination polymerisation catalysed by transition‑metal complexes. Classical Ziegler‑Natta catalysts consist of a titanium tetrachloride (TiCl₄) supported on magnesium chloride (MgCl₂) combined with an organoaluminium co‑catalyst such as triethylaluminium (AlEt₃). The active site is a Ti³⁺ centre with a vacant coordination site that binds the alkene π bond; insertion into the Ti–C bond propagates the polymer chain. The heterogeneous nature of the catalyst yields polymers with broad molecular‑weight distributions (Đ ≈ 5–10) and limited control over tacticity. Metallocene catalysts, discovered in the 1980s, are homogeneous single‑site complexes of the type Cp₂MCl₂ (M = Zr, Hf, Ti) activated by methylaluminoxane (MAO). The well‑defined geometry of the metallocene (ansa‑bridged, C₂‑symmetric, or Cₛ‑symmetric) dictates the stereochemistry of monomer insertion, enabling production of isotactic, syndiotactic, or atactic polypropylene with narrow molecular‑weight distributions (Đ ≈ 2). The polymerisation follows a Cossee‑Arlman mechanism: alkene coordination, migratory insertion into the metal‑alkyl bond, and chain propagation. Chain transfer to aluminium (β‑hydride transfer to Al) and β‑hydride elimination to metal control molecular weight. Copolymerisation of ethylene with α‑olefins (1‑hexene, 1‑octene) introduces short‑chain branches, tailoring density and mechanical properties (linear low‑density polyethylene, LLDPE). Recent developments include post‑metallocene catalysts (e.g., phenoxy‑imine Ni/ Pd complexes) that operate at lower temperatures and tolerate polar functional groups, expanding the monomer scope to polar olefins. Understanding the relationship between catalyst symmetry, active‑site electronics, and polymer microstructure is essential for designing materials with targeted properties.
Catalyst Comparison
| Feature | Ziegler‑Natta | Metallocene |
|---|---|---|
| Active site | Heterogeneous, multiple sites | Homogeneous, single site |
| Molecular‑weight distribution (Đ) | Broad (5–10) | Narrow (≈2) |
| Tacticity control | Limited (mostly atactic PP) | Precise (iso‑, syndio‑, atactic) |
| Comonomer incorporation | Statistical, less uniform | Uniform, predictable |
| Process conditions | Slurry or gas phase, 70–100 °C | Solution or gas phase, 50–80 °C |
Key Mechanistic Steps
- Activation: MAO abstracts a chloride from Cp₂MCl₂ generating a cationic metallocene alkyl species.
- Coordination: Alkene π‑bond binds to the vacant site on the metal.
- Migratory insertion: The alkyl group migrates to the coordinated alkene, extending the chain by one repeat unit.
- Chain transfer/termination: β‑hydride elimination to metal or transfer to aluminium yields a saturated chain end and regenerates the active species.
Oxidative Cleavage and Functional Group Interconversion of Unsaturated Hydrocarbons
Oxidative cleavage converts carbon–carbon multiple bonds into carbonyl or carboxyl functionalities, providing a powerful tool for structure elucidation and synthesis. Ozonolysis of alkenes proceeds via a primary ozonide (molozonide) that rearranges to a stable ozonide; reductive work‑up (Zn/AcOH, Me₂S, PPh₃) yields aldehydes or ketones, while oxidative work‑up (H₂O₂) oxidises aldehydes to carboxylic acids. For terminal alkenes, reductive work‑up gives formaldehyde (often lost as gas) and a carbonyl fragment; oxidative work‑up gives carbon dioxide and a carboxylic acid. Alkynes undergo ozonolysis to give α‑dicarbonyl ozonides that hydrolyse to two carboxylic acids (or CO₂ for terminal alkynes). Hot, concentrated KMnO₄ cleaves alkenes to ketones (if both carbons are substituted) or carboxylic acids (if a carbon bears at least one hydrogen); the reaction proceeds through a cyclic manganate ester that fragments. Alkynes are oxidised by KMnO₄ to diketones (glyoxal derivatives) which further hydrolyse to carboxylic acids. The Lemieux–Johnson reagent (OsO₄/NaIO₄) performs dihydroxylation followed by periodate cleavage, delivering carbonyl compounds under mild, neutral conditions. These transformations are stereospecific: syn dihydroxylation by OsO₄ gives vicinal diols that retain the original alkene geometry; subsequent periodate cleavage breaks the C–C bond between the two hydroxyl‑bearing carbons. In synthetic planning, oxidative cleavage is used to fragment complex polyenes into identifiable carbonyl fragments (e.g., ozonolysis of a natural product to deduce the carbon skeleton). Care must be taken with over‑oxidation: prolonged exposure to KMnO₄ can oxidise aldehydes to acids and cleave adjacent C–C bonds. Protective groups (acetals for aldehydes) or milder reagents (OsO₄/NaIO₄) mitigate side reactions.
Reagent Selection Guide
| Reagent | Substrate | Work‑up | Products |
|---|---|---|---|
| O₃ | Alkene | Reductive (Me₂S) | Aldehydes/ketones |
| O₃ | Alkene | Oxidative (H₂O₂) | Carboxylic acids (aldehydes oxidised) |
| O₃ | Alkyne | Reductive | α‑Dicarbonyls → acids |
| KMnO₄ (hot, conc.) | Alkene | – | Ketones or acids |
| KMnO₄ (cold, dilute) | Alkene | – | Vicinal diols (syn) |
| OsO₄/NaIO₄ | Alkene | – | Carbonyl fragments (cleavage) |
Synthetic Applications
- Structure determination: ozonolysis of an unknown terpene yields identifiable carbonyl fragments for GC‑MS analysis.
- Ring opening: oxidative cleavage of cycloalkenes gives dicarbonyl compounds useful as building blocks.
- Functional group interconversion: conversion of a terminal alkene to a carboxylic acid via oxidative ozonolysis (two‑step: ozonolysis → oxidative work‑up).
- Protecting‑group strategy: dihydroxylation/periodate cleavage can be used to remove a vinyl group selectively.
- Assuming Markovnikov addition for all HX additions – peroxide effect reverses regioselectivity only for HBr.
- Neglecting carbocation rearrangements in solvolysis or addition reactions – always check for possible 1,2‑hydride or alkyl shifts.
- Treating all halogen substituents as meta directors – halogens are ortho/para directors despite being deactivating.
- Expecting Friedel‑Crafts alkylation to give a single product – polyalkylation and rearrangements are common.
- Using hot KMnO₄ for mild dihydroxylation – cold dilute KMnO₄ or OsO₄ gives syn diols; hot conc. KMnO₄ cleaves the bond.
- Overlooking stereochemical outcome of syn vs anti addition – catalytic hydrogenation and hydroboration are syn; halogen addition is anti.
- Assuming metallocene catalysts behave like Ziegler‑Natta – single‑site metallocenes give narrow Đ and precise tacticity control.