Module 1 · NEET Physics

Thermal Properties, Kinetic Theory & Thermodynamics

Updated 17 Nov 2026 · 4,941 words · 5 sections · illustrated
Updated 16 Nov 2026
Thermal expansion and calorimetry, kinetic theory, and the laws of thermodynamics.
Calorimetry · Kinetic Theory · Thermodynamics · Heat Engines
🎯 Take Mock Test
SUVAT EquationsProjectile MotionWork‑Energy TheoremGravitationSHMKinetic Theoryleads toextendsrelatesconnectsleads toExam hook: SUVAT → range = u²sin2θ/gKey: g = GM/R²; v_esc = √(2GM/R)vlymbooq
Kinematics Work Energy Gravitation SHM Kinetic Theory Overview — This diagram maps the core mechanics concepts from SUVAT to kinetic theory showing their logical flow. · Open the full diagram →

Learning Objectives

  • Understand the fundamental concepts of Thermal Properties, Kinetic Theory & Thermodynamics
  • Apply key formulas and techniques to solve problems
  • Practice with exam-level questions to build speed and accuracy

Thermal Expansion and Calorimetry

1.1 Linear Expansion of Solids

When a solid is heated its atoms vibrate with larger amplitude about their equilibrium positions, and the average inter‑atomic distance increases. This microscopic change manifests macroscopically as an increase in length that is, for modest temperature intervals, directly proportional to the original length and to the temperature change. The proportionality constant is called the coefficient of linear expansion α and is defined by the relation ΔL = α L₀ ΔT, where ΔL is the change in length, L₀ the original length and ΔT the temperature rise. Because α depends on the bonding forces, different materials exhibit widely different values; for example, typical metals have α of the order of 10⁻⁵ K⁻¹ while glasses are an order of magnitude smaller. The linear expansion coefficient is a material property that can be measured by a simple dilatometer and is essential for designing structures that experience temperature variations, such as railway tracks and bridges.

In practical engineering the linear expansion of a component is often constrained by neighbouring parts, giving rise to thermal stress. If a rod of length L₀ is prevented from expanding, the stress σ developed is σ = Y α ΔT, where Y is Young’s modulus. This stress can exceed the yield strength of the material if the temperature change is large, leading to buckling or fracture. Consequently, expansion joints are incorporated in long pipelines and concrete slabs to accommodate the inevitable dimensional changes without generating destructive stresses.

1.2 Area and Volume Expansion

For isotropic solids the area expansion coefficient β and the volume expansion coefficient γ are related to the linear coefficient by β ≈ 2α and γ ≈ 3α, because area scales as the square of length and volume as the cube. These approximations hold when α ΔT ≪ 1, which is true for most everyday temperature ranges. The change in area ΔA of a plate is ΔA = β A₀ ΔT and the change in volume ΔV of a block is ΔV = γ V₀ ΔT. In liquids and gases only volume expansion is meaningful, and the coefficient of volume expansion is usually denoted by β (or γ) and is considerably larger than for solids; for water near 4 °C the coefficient even becomes negative, a unique anomaly that has profound ecological consequences.

Accurate knowledge of volume expansion is crucial for the calibration of liquid‑in‑glass thermometers and for the design of containers that must hold a precise volume of fluid over a temperature range. In the petroleum industry, for instance, the volume correction factor applied to measured quantities of crude oil depends directly on the coefficient of volume expansion of the oil at the prevailing temperature.

1.3 Calorimetry and Specific Heat Capacity

Calorimetry is the experimental technique used to measure the heat exchanged during a physical or chemical process. The fundamental principle is the conservation of energy: in an isolated system the heat lost by the hotter body equals the heat gained by the colder body, provided no phase change occurs. The heat Q transferred to a mass m of a substance producing a temperature change ΔT is Q = m c ΔT, where c is the specific heat capacity, a material constant expressed in J kg⁻¹ K⁻¹. For water c ≈ 4186 J kg⁻¹ K⁻¹, a value that makes water an excellent heat reservoir and underlies its role in climate regulation.

When a phase change occurs, the temperature remains constant while heat is absorbed or released as latent heat. The latent heat of fusion L_f and latent heat of vaporisation L_v are defined per unit mass, so the heat required for melting is Q = m L_f and for boiling Q = m L_v. In a typical calorimetry problem a known mass of hot metal is dropped into a calorimeter containing water; by measuring the final equilibrium temperature one can determine the specific heat of the metal. The method assumes negligible heat loss to the surroundings, an assumption that is improved by using a well‑insulated calorimeter and by applying a correction for the heat capacity of the calorimeter itself.

Comparison of linear, area and volume expansion coefficients for isotropic solids
CoefficientSymbolRelation to αTypical magnitude (metals)
Linearαα1–2 × 10⁻⁵ K⁻¹
Areaβ≈ 2α2–4 × 10⁻⁵ K⁻¹
Volumeγ≈ 3α3–6 × 10⁻⁵ K⁻¹

Kinetic Theory of Gases

2.1 Molecular Model and Pressure

The kinetic theory treats a gas as a large collection of point‑like molecules in random motion, colliding elastically with each other and with the walls of the container. Pressure arises from the momentum transfer during these wall collisions. By considering a single molecule of mass m moving with velocity component v_x perpendicular to a wall of area A, the momentum change per collision is 2 m v_x and the number of collisions per unit time is v_x / (2L) for a cubic container of side L. Summing over all molecules yields the macroscopic pressure p = (1/3) (N/V) m ⟨v²⟩, where N is the total number of molecules, V the volume and ⟨v²⟩ the mean square speed. This expression connects the microscopic kinetic energy of molecules to the macroscopic pressure and provides a molecular interpretation of the ideal‑gas law pV = N k_B T.

The derivation assumes that intermolecular forces are negligible except during instantaneous collisions, that the volume occupied by the molecules themselves is negligible compared with the container volume, and that the molecular velocities follow a Maxwell‑Boltzmann distribution. These assumptions are excellent for dilute gases at high temperature and low pressure, but they break down for dense gases where the van der Waals corrections become necessary.

2.2 Temperature and Kinetic Energy

Equating the kinetic‑theory pressure expression with the ideal‑gas law gives (1/3) (N/V) m ⟨v²⟩ = (N/V) k_B T, which simplifies to (1/2) m ⟨v²⟩ = (3/2) k_B T. Thus the average translational kinetic energy per molecule is directly proportional to the absolute temperature, with the Boltzmann constant k_B = 1.38 × 10⁻²³ J K⁻¹ as the proportionality factor. This result is a cornerstone of statistical mechanics: temperature is a measure of the average translational kinetic energy of the constituent particles. The root‑mean‑square speed v_rms = √⟨v²⟩ = √(3 k_B T / m) follows immediately, showing that lighter molecules move faster at a given temperature.

Because the kinetic energy depends only on temperature, all ideal gases at the same temperature have the same average translational kinetic energy per molecule, regardless of their molecular mass. This principle underlies the equipartition theorem, which extends the energy distribution to rotational and vibrational degrees of freedom when they are active.

2.3 Degrees of Freedom and Equipartition

A degree of freedom is an independent quadratic term in the expression for the microscopic energy of a molecule. A monatomic gas has three translational degrees of freedom; a diatomic molecule at moderate temperatures adds two rotational degrees of freedom, giving five in total. At higher temperatures vibrational modes become active, each contributing two quadratic terms (kinetic and potential) and thus two additional degrees of freedom. According to the equipartition theorem, each quadratic degree of freedom carries an average energy of (1/2) k_B T. Consequently, the molar internal energy U_m of an ideal gas is U_m = (f/2) R T, where f is the number of active degrees of freedom per molecule and R = N_A k_B is the universal gas constant.

The ratio of specific heats γ = C_p / C_v follows from the degrees of freedom: C_v = (f/2) R and C_p = C_v + R = (f/2 + 1) R, so γ = (f + 2) / f. For a monatomic gas f = 3 giving γ = 5/3 ≈ 1.67; for a rigid diatomic gas f = 5 giving γ = 7/5 = 1.40. Experimental measurements of γ provide a direct probe of the active degrees of freedom and therefore of the molecular structure.

Example 1: Calculation of RMS Speed
A sample of nitrogen gas (molar mass 28 g mol⁻¹) is at a temperature of 300 K. Calculate the root‑mean‑square speed of the nitrogen molecules.
The molar mass M = 28 g mol⁻¹ = 0.028 kg mol⁻¹. The mass of one molecule m = M / N_A = 0.028 kg mol⁻¹ / 6.022 × 10²³ mol⁻¹ ≈ 4.65 × 10⁻²⁶ kg. Using v_rms = √(3 k_B T / m) with k_B = 1.38 × 10⁻²³ J K⁻¹ and T = 300 K gives v_rms = √(3 × 1.38 × 10⁻²³ × 300 / 4.65 × 10⁻²⁶) ≈ √(2.67 × 10⁵) ≈ 517 m s⁻¹. Therefore the rms speed of nitrogen molecules at 300 K is about 5.2 × 10² m s⁻¹.
Exam Insight
When a question asks for the ratio of specific heats, remember that γ = Cp/Cv = (f+2)/f where f is the degrees of freedom; this shortcut avoids recalculating Cp and Cv from first principles.

First Law of Thermodynamics

3.1 Internal Energy and Heat

The first law of thermodynamics is a statement of energy conservation for thermodynamic systems. It asserts that the change in internal energy ΔU of a closed system equals the heat Q supplied to the system minus the work W done by the system on its surroundings: ΔU = Q – W. Internal energy U is a state function that depends only on the current equilibrium state (e.g., temperature, volume, composition) and not on the path taken to reach that state. Heat and work, by contrast, are path‑dependent modes of energy transfer; they are not properties of the system. The sign convention used here follows the physics tradition: Q is positive when heat enters the system, and W is positive when the system performs work on the environment.

For an ideal gas the internal energy depends solely on temperature, U = n C_v T, where n is the amount of substance and C_v the molar heat capacity at constant volume. This temperature‑only dependence is a direct consequence of the kinetic‑theory result that intermolecular potential energy is negligible. Consequently, any process that brings an ideal gas from temperature T₁ to T₂ changes its internal energy by ΔU = n C_v (T₂ – T₁), irrespective of whether the process is isochoric, isobaric, or adiabatic.

3.2 Work Done by a Gas

When a gas expands or is compressed quasi‑statically, the work done by the gas is given by the integral W = ∫ p dV, where p is the instantaneous pressure of the gas and dV the infinitesimal volume change. For a reversible isothermal expansion of an ideal gas, p = nRT/V, so W = nRT ∫ dV/V = nRT ln(V₂/V₁). In an adiabatic reversible process the pressure and volume satisfy pV^γ = constant, leading to W = (p₁V₁ – p₂V₂)/(γ – 1) = nR(T₁ – T₂)/(γ – 1). These expressions are fundamental for analysing heat engines and refrigerators, where the net work output over a cycle is the area enclosed by the cycle on a p‑V diagram.

In irreversible processes, such as a free expansion into vacuum, the external pressure is zero and the work done by the gas is zero even though the volume changes. The first law still holds, but the heat exchange must be evaluated from the actual path, which in a free expansion of an ideal gas is zero, so ΔU = 0 and the temperature remains constant. This illustrates that work depends on the external constraints, not merely on the initial and final states.

3.3 Applications to Cyclic Processes

A thermodynamic cycle returns the system to its initial state, so the net change in internal energy over one complete cycle is zero: ∮ dU = 0. The first law then reduces to ∮ δQ = ∮ δW, meaning the net heat absorbed equals the net work done by the system. In a heat engine the working substance absorbs heat Q_H from a high‑temperature reservoir, converts part of it into work W, and rejects the remainder Q_C to a low‑temperature reservoir. The efficiency η is defined as η = W / Q_H = 1 – Q_C / Q_H. For a reversible Carnot cycle operating between temperatures T_H and T_C, the efficiency reaches the maximum possible value η_Carnot = 1 – T_C / T_H, where temperatures are in kelvin. Real engines have lower efficiencies because of irreversibilities such as friction, finite temperature differences during heat transfer, and non‑quasi‑static steps.

The first law also governs refrigerators and heat pumps, which operate as heat engines in reverse. A refrigerator extracts heat Q_C from a cold reservoir by having work W done on it, and delivers heat Q_H = Q_C + W to a hot reservoir. Its coefficient of performance (COP) is defined as COP_R = Q_C / W = Q_C / (Q_H – Q_C). For a reversible Carnot refrigerator COP_R,Carnot = T_C / (T_H – T_C). These relations set the theoretical limits for any cooling device and are used to assess the performance of actual vapour‑compression and absorption refrigeration cycles.

Dual NatureAtomic ModelsNuclear PhysicsSemiconductorsFormula Sheet→→→Photoelectric effect: E = hνNEET: 2–3 questions per unitvlymbooq
Modern Physics Concept Flow for NEET Exam Revision — Shows the logical progression from wave‑particle duality through atomic and nuclear models to semiconductor devices, with key formulas and NEET pitfalls. · Open the full diagram →

Second Law and Entropy

4.1 Kelvin‑Planck and Clausius Statements

The second law of thermodynamics introduces the concept of irreversibility and the directionality of natural processes. The Kelvin‑Planck statement asserts that it is impossible to construct a device that operates in a cycle and produces no effect other than the absorption of heat from a single reservoir and the performance of an equivalent amount of work. The Clausius statement declares that it is impossible to construct a device that operates in a cycle and produces no effect other than the transfer of heat from a colder body to a hotter body without external work. These two statements are logically equivalent; a violation of one would permit a violation of the other, and both encapsulate the empirical observation that heat does not spontaneously flow from cold to hot.

From these statements one can derive the existence of a state function called entropy S, defined for a reversible process by dS = δQ_rev / T. The second law then takes the compact form ΔS_universe ≥ 0 for any real process, with equality only for reversible processes. Entropy thus quantifies the degree of disorder or the number of microscopic configurations compatible with a macroscopic state, and its increase is the thermodynamic arrow of time.

4.2 Entropy Change in Reversible and Irreversible Processes

For a reversible isothermal expansion of an ideal gas from V₁ to V₂, the heat absorbed is Q_rev = nRT ln(V₂/V₁), so the entropy change of the gas is ΔS = Q_rev / T = nR ln(V₂/V₁). In a reversible adiabatic process δQ_rev = 0, hence ΔS = 0; such processes are isentropic. For an irreversible process the entropy change of the system is still computed by integrating δQ_rev / T along a reversible path connecting the same initial and final states, because entropy is a state function. However, the total entropy change of the universe is positive, reflecting the generation of entropy within the system or surroundings.

A classic illustration is the free expansion of an ideal gas into vacuum. The gas does no work and exchanges no heat, so ΔU = 0 and the temperature stays constant. Yet the volume doubles, and the entropy increase is ΔS = nR ln 2 > 0. The surroundings experience no entropy change, so the universe’s entropy rises, confirming the irreversibility of the free expansion. This example underscores that entropy can increase even when no heat is transferred, provided the process is internally irreversible.

4.3 Carnot Cycle and Maximum Efficiency

The Carnot cycle consists of two reversible isotherms and two reversible adiabats, forming a rectangle on a T‑S diagram and a closed loop on a p‑V diagram. During the high‑temperature isothermal expansion at T_H the working substance absorbs heat Q_H = T_H ΔS, and during the low‑temperature isothermal compression at T_C it rejects heat Q_C = T_C ΔS. The net work per cycle is W = Q_H – Q_C = (T_H – T_C) ΔS, and the efficiency is η = W / Q_H = 1 – T_C / T_H. No engine operating between the same two reservoirs can exceed this efficiency, because any hypothetical engine with η > η_Carnot would, when coupled to a Carnot refrigerator, produce a net transfer of heat from cold to hot without external work, violating the Clausius statement.

The Carnot cycle also defines the absolute thermodynamic temperature scale: the ratio of temperatures of two reservoirs equals the ratio of heats exchanged in a reversible cycle, T_H / T_C = Q_H / Q_C. This provides a temperature definition independent of any particular thermometric substance. In practice, real engines deviate from the Carnot ideal because heat transfer occurs across finite temperature differences, friction dissipates work, and the working fluid may not behave as an ideal gas. Nevertheless, the Carnot efficiency remains the benchmark against which all heat‑engine performances are measured.

Comparison of Carnot efficiency and typical real‑engine efficiencies
Engine typeTypical hot‑reservoir temperature (K)Typical cold‑reservoir temperature (K)Carnot efficiencyAchievable efficiency
Steam turbine (coal)80030062 %35–45 %
Gas turbine (combined cycle)150030080 %55–60 %
Internal combustion (Otto)250030088 %25–30 %

Heat Engines and Refrigerators

5.1 Efficiency of Real Engines

Real heat engines differ from the Carnot ideal in several systematic ways. First, combustion and heat‑transfer processes occur across finite temperature differences, which introduces irreversibility and reduces the effective temperature at which heat is absorbed. Second, mechanical friction in moving parts converts a portion of the useful work into internal energy that is ultimately rejected as waste heat. Third, the working fluid often deviates from ideal‑gas behaviour, especially at high pressures, causing the p‑V diagram to depart from the idealised shape. Engineers quantify these losses through the concepts of indicated thermal efficiency (based on the ideal cycle) and brake thermal efficiency (measured at the output shaft). The difference between them is the mechanical efficiency, which accounts for friction and pumping losses.

Modern combined‑cycle power plants mitigate some of these losses by using the exhaust heat from a gas turbine to generate steam for a secondary steam turbine, thereby extracting work from a larger temperature span. This approach raises the overall efficiency well above that of a simple Brayton or Rankine cycle alone, yet it still falls short of the Carnot limit because each subsystem operates with its own irreversibilities. The second law guarantees that no clever arrangement of components can circumvent the fundamental bound set by the reservoir temperatures.

5.2 Coefficient of Performance of Refrigerators

For a refrigerator the figure of merit is the coefficient of performance COP_R = Q_C / W, where Q_C is the heat removed from the cold space and W the work input. In a vapour‑compression cycle the refrigerant undergoes evaporation at low pressure (absorbing Q_C), compression (requiring W), condensation at high pressure (rejecting Q_H), and throttling back to low pressure. The COP of an ideal reversible cycle operating between T_C and T_H is COP_R,Carnot = T_C / (T_H – T_C). Real refrigerants have non‑ideal thermodynamic properties, and the compressor is not isentropic, so the actual COP is typically 0.5–0.7 times the Carnot value. Improvements such as multi‑stage compression, economisers, and variable‑speed drives narrow this gap.

Heat pumps operate on the same cycle but are evaluated by the heating COP, COP_HP = Q_H / W = 1 + COP_R. Because Q_H = Q_C + W, the heating COP is always greater than unity, making heat pumps an energy‑efficient alternative to direct electric heating when the temperature lift (T_H – T_C) is moderate. The performance of both refrigerators and heat pumps degrades as the temperature difference between the reservoirs widens, a direct consequence of the T_C / (T_H – T_C) dependence.

5.3 Practical Considerations and Limitations

In addition to thermodynamic limits, practical devices face constraints from material science, environmental regulations, and economic factors. High‑temperature turbines require superalloys that can withstand creep and oxidation, while low‑temperature refrigeration demands refrigerants with low global‑warming potential and zero ozone‑depletion potential. The phase‑out of chlorofluorocarbons has driven the adoption of hydrofluoroolefins and natural refrigerants such as ammonia and carbon dioxide, each bringing its own safety and efficiency trade‑offs. Moreover, the capital cost of high‑efficiency equipment must be balanced against the operating‑cost savings over the plant lifetime, a calculation that often determines the chosen technology more than the theoretical maximum efficiency.

Finally, the integration of renewable energy sources introduces variable‑temperature heat reservoirs, for example solar thermal collectors that deliver heat at temperatures that fluctuate with insolation. Designing engines and refrigerators that maintain high performance across a range of source temperatures is an active area of research, involving advanced cycles such as the Kalina cycle, organic Rankine cycles, and thermoelectric converters. These developments illustrate how the fundamental laws of thermodynamics continue to guide engineering innovation while setting immutable boundaries on what is physically possible.

Thermodynamic Potentials and Maxwell Relations

The four fundamental thermodynamic potentials — internal energy U, enthalpy H = U + pV, Helmholtz free energy F = U – TS, and Gibbs free energy G = H – TS — are Legendre transforms of one another. Each is a natural function of a specific variable pair: U(S,V), H(S,p), F(T,V), G(T,p). Their differentials are dU = T dS – p dV, dH = T dS + V dp, dF = –S dT – p dV, dG = –S dT + V dp. Equality of mixed second derivatives yields Maxwell relations. From dG: (∂S/∂p)ₜ = –(∂V/∂T)ₚ, linking entropy change with pressure to thermal expansion. The other three are (∂T/∂V)ₛ = –(∂p/∂S)ᵥ, (∂T/∂p)ₛ = (∂V/∂S)ₚ, (∂S/∂V)ₜ = (∂p/∂T)ᵥ. These replace difficult entropy derivatives with measurable quantities like the thermal expansion coefficient α = (1/V)(∂V/∂T)ₚ and isothermal compressibility κₜ = –(1/V)(∂V/∂p)ₜ. Maxwell relations underpin thermodynamic data reduction: they enable calculation of ΔS for a real gas from p‑V‑T data and the derivation of the Joule‑Thomson coefficient μ_JT = (∂T/∂p)ₕ = V(Tα – 1)/Cₚ. Mastery is essential for entropy changes in non‑ideal processes and verifying second‑law compliance in cycles.

Phase Transitions and the Clapeyron Equation

A first‑order phase transition shows a discontinuity in the first derivatives of Gibbs free energy: specific volume v and entropy s. Along the coexistence curve, chemical potentials are equal: g₁(T,p) = g₂(T,p). Differentiation gives the Clapeyron equation dp/dT = Δs/Δv = L/(T Δv), where L = T Δs is the latent heat per unit mass. For solid–liquid transitions, Δv is usually small and positive, giving a large positive slope; for water, Δv is negative (ice is less dense), so the slope is negative — pressure lowers the melting point. For liquid–vapour, Δv ≈ v_g (since v_g ≫ v_l), and with the ideal‑gas approximation v_g = RT/p we obtain the integrated Clausius–Clapeyron form ln(p) = –L/(RT) + C, used for boiling‑point determination and steam tables. The equation also applies to solid–solid polymorphic transitions (e.g., graphite ↔ diamond) where Δv is measurable by X‑ray diffraction. A common exam problem gives latent heat and specific volumes at one temperature and asks for the pressure change to shift the transition temperature by ΔT; the linear approximation Δp = (L/(T Δv)) ΔT applies if L and Δv are nearly constant.

Worked Example: Pressure Shift of Melting Point
The latent heat of fusion of a substance is 6.0 kJ mol⁻¹. At its normal melting point 300 K the molar volume increases by 2.0 cm³ mol⁻¹ on melting. Estimate the pressure increase needed to raise the melting point by 1 K.
Use the Clapeyron equation in linear form Δp = (L / (T Δv)) ΔT. Convert Δv: 2.0 cm³ mol⁻¹ = 2.0 × 10⁻⁶ m³ mol⁻¹. L = 6.0 × 10³ J mol⁻¹, T = 300 K, ΔT = 1 K. Δp = (6.0 × 10³) / (300 × 2.0 × 10⁻⁶) × 1 = (6.0 × 10³) / (6.0 × 10⁻⁴) = 1.0 × 10⁷ Pa = 10 MPa. A pressure increase of about 10 MPa (≈100 atm) is required.
Exam‑Day Strategy
When a question supplies latent heat and volume change, immediately write the Clapeyron slope dp/dT = L/(TΔv). Check units: L in J mol⁻¹, Δv in m³ mol⁻¹, T in K gives dp/dT in Pa K⁻¹. For a small temperature interval, multiply the slope by ΔT. Remember that for water Δv is negative, so the slope is negative — a common sign‑error trap.

Statistical Interpretation of Entropy and Boltzmann’s Formula

Entropy gains microscopic meaning via Boltzmann’s principle S = k_B ln Ω, where Ω is the number of microstates for a given macrostate (E, V, N). For an ideal gas of N indistinguishable particles, phase‑space volume yields the Sackur–Tetrode equation S = N k_B [ ln( V/N (4πmU/3Nh²)3/2 ) + 5/2 ], which is extensive and gives (∂S/∂U)_V = 1/T. Statistically, entropy increases because systems evolve toward the macrostate with the largest Ω. In free expansion of an ideal gas, accessible position microstates multiply by (V_f/V_i)^N, giving ΔS = N k_B ln(V_f/V_i), matching ∫ dQ_rev/T. The same combinatorics explains residual entropy of glasses and mixing entropy: for two ideal gases, mixing increases Ω by (N₁+N₂)!/(N₁! N₂!), yielding ΔS_mix = –R (n₁ ln x₁ + n₂ ln x₂). Exams often test linking the Clausius inequality ∮ δQ/T ≤ 0 with ΔS ≥ 0 for isolated systems, noting equality holds only for reversible paths where the system remains in equilibrium with the reservoir.

Real Gas Behaviour: Van der Waals Equation and Critical Phenomena

The Van der Waals equation (p + a/V_m²)(V_m – b) = RT adds two corrections: a for attractive forces (reducing wall pressure) and b for excluded volume per mole. The critical point follows from (∂p/∂V_m)_T = 0 and (∂²p/∂V_m²)_T = 0, giving V_c = 3b, p_c = a/(27b²), T_c = 8a/(27Rb). The critical compressibility factor Z_c = p_c V_c/(RT_c) = 3/8 = 0.375 is a universal model prediction; real fluids show Z_c between 0.23 and 0.31. Below T_c the isotherm has a van der Waals loop with negative compressibility; Maxwell’s equal‑area construction replaces it with a horizontal tie line at saturation pressure, equating chemical potentials of liquid and vapour. The law of corresponding states emerges in reduced variables p_r = p/p_c, V_r = V_m/V_c, T_r = T/T_c, yielding (p_r + 3/V_r²)(3V_r – 1) = 8T_r, predicting a universal reduced coexistence curve useful for estimating properties. For the Joule‑Thomson effect, the Van der Waals model gives a maximum inversion temperature T_inv,max = 2a/(Rb) = (27/4)T_c ≈ 6.75 T_c, a relation that holds qualitatively for many real gases.

Irreversibility, Exergy, and the Gouy‑Stodola Theorem

Exergy (availability) is the maximum useful work when a system equilibrates with a reference environment at T₀, p₀. For a closed system, specific exergy is ψ = (u – u₀) + p₀(v – v₀) – T₀(s – s₀). The Gouy‑Stodola theorem states exergy destruction rate equals T₀ times entropy generation rate: Ė_D = T₀ Ṡ_gen, linking the second law to engineering metrics. In steady flow, the exergy balance is ∑(1 – T₀/T_k) Q̇_k – Ẇ + ∑ṁ_in ψ_in – ∑ṁ_out ψ_out = Ė_D. For a heat engine receiving Q_H at T_H and rejecting Q_C at T_C, Ė_D = T₀ (Q_C/T_C – Q_H/T_H). Minimising Ė_D maximises second‑law efficiency η_II = Ẇ / (∑(1 – T₀/T_k) Q̇_k). Typical combined‑cycle plants achieve second‑law efficiencies above 60 % while first‑law efficiencies are near 55 %. Exams often ask for exergy loss in a throttling valve given inlet/outlet states and T₀; since throttling is isenthalpic and work‑free, Ė_D = ṁ(ψ_in – ψ_out).

  • Confusing the Maxwell relation from G with that from F; recall natural variables: G(T,p) gives (∂S/∂p)ₜ = –(∂V/∂T)ₚ, while F(T,V) gives (∂S/∂V)ₜ = (∂p/∂T)ᵥ.
  • Forgetting the sign of Δv in the Clapeyron equation for water; ice has larger specific volume, so dp/dT is negative and pressure lowers the melting point.
  • Using the ideal‑gas expression for ΔS in a free expansion of a real gas without verifying ideal behaviour at the given state.
  • Assuming the Van der Waals critical compressibility factor Z_c = 3/8 applies to all real fluids; actual Z_c values differ, and the deviation measures the model’s limitation.
  • Neglecting the environment temperature T₀ when calculating exergy destruction; the Gouy‑Stodola theorem explicitly contains T₀, so a change in reference temperature alters Ė_D.
  • Treating the Joule‑Thomson inversion temperature as a single value; the Van der Waals model gives a maximum inversion temperature 2a/(Rb) and a minimum that depends on pressure.
  • Mixing up first‑law efficiency (energy out/energy in) with second‑law efficiency (exergy out/exergy in); they coincide only for a Carnot engine operating between the same reservoirs as the environment.

Practice Questions

← Mechanical Properties of Solids & Fluids Oscillations & Waves →