GATE — Paper (Full Paper)

65 Q · 100 marks · 180 min · Answer key + explanations

65 questions100 marks180 minutes-1/3 for a 1-mark MCQ, -2/3 for a 2-mark MCQ; no negative for numerical-answer questions

Generated 2026-11-15T18:30:40.454Z · reviewed question bank · Source: GATE: 65 questions, 100 marks, 180 minutes; General Aptitude 10 questions (15 marks), core 55 questions (85 marks).

Run this paper as a timed test
65 questions · 100 marks · 180 minutes · -1/3 for a 1-mark MCQ, -2/3 for a 2-mark MCQ; no negative for numerical-answer questions
--:--:--Negative marking: -1/3 for a 1-mark MCQ, -2/3 for a 2-mark MCQ; no negative for numerical-answer questions

Answer the questions, then press “Show answer” on any question or use the key at the bottom. This page and the PDF are printable.

Download PDF

General Aptitude 10 Q · 15 marks

Q1General Aptitude
If x + y = 10 and xy = 21, then x^2 + y^2 is:
Q2General Aptitude
A man buys a book for 500 and sells it for 600. Profit percentage is:
Q3General Aptitude
Find the next term: 3, 9, 27, 81, ?
Q4General Aptitude
Choose the correct spelling:
Q5General Aptitude
If 3x + 2 = 11, then x = ?
Q6General Aptitude
A train 150 m long passes a pole in 15 seconds. Find the speed of the train in km/h.
Q7General Aptitude
A die is rolled once. Probability of getting an even number is:
Q8General Aptitude
Find the odd one out: 2, 4, 8, 16, 24, 32
Q9General Aptitude
If 5 men can build a wall in 12 days, how many days will 10 men take?
Q10General Aptitude
The simple interest on 1000 at 5% per annum for 2 years is:

Core Subject 55 Q · 85 marks

Q11Core Subject
Quick sand condition occurs when:
Q12Core Subject
Which traversal gives sorted order in a BST?
Q13Core Subject
TIG welding uses which electrode?
Q14Core Subject
A semaphore that is used as a binary lock is called:
Q15Core Subject
The bending moment at a simply supported beam's center with point load P at center is:
Q16Core Subject
The factor of safety is defined as:
Q17Core Subject
The main function of an operating system is:
Q18Core Subject
The impedance of a capacitor of capacitance C at frequency is:
Q19Core Subject
In am in-heap, the smallest element is at:
Q20Core Subject
The modulus of rigidity relates shear stress to:
Q21Core Subject
Which of the following is a linear data structure?
Q22Core Subject
The unit of moment of inertia is:
Q23Core Subject
An ideal op-amp has infinite:
Q24Core Subject
A stack is implemented using an array. If the top pointer is at index 5, what is the current size of the stack?
Q25Core Subject
The number of bits in a nibble is:
Q26Core Subject
Thevenin's theorem is used to simplify:
Q27Core Subject
What is the value of the integral of x^2 dx from 0 to 2?
Q28Core Subject
Kirchhoff's current law is based on:
Q29Core Subject
A 4-bit R-2R DAC uses resistors of values:
Q30Core Subject
What is the order of the differential equation d^2y/dx^2 + 3dy/dx + 2y = 0?
Q31Core Subject
Class A amplifier has conduction angle of:
Q32Core Subject
Which language is accepted by Pushdown Automata?
Q33Core Subject
The optimum depth of a canal is when:
Q34Core Subject
The pH of pure water is:
Q35Core Subject
The cutting speed in a lathe is measured in:
Q36Core Subject
In a CPU, what is the main function of the cache memory?
Q37Core Subject
The bandwidth of an ideal bandpass filter is:
Q38Core Subject
A language accepted by a Finite Automaton is called:
Q39Core Subject
Beam deflection is maximum at:
Q40Core Subject
The unit of entropy is:
Q41Core Subject
The operation of enlarging a hole is called:
Q42Core Subject
The grade of concrete M20 means:
Q43Core Subject
In an isothermal process, which quantity remains constant?
Q44Core Subject
Which process is used to make threads on a bolt?
Q45Core Subject
The bearing capacity of soil is improved by:
Q46Core Subject
The Euler's buckling load for a column depends on:
Q47Core Subject
Which memory has the fastest access time?
Q48Core Subject
The COP of a refrigerator is 4. If it extracts 200 J from cold reservoir, work input is:
Q49Core Subject
The height of a complete binary tree with nno des is:
Q50Core Subject
In virtual memory, which technique is used for address translation?
Q51Core Subject
In a computer network, what is the purpose of the router?
Q52Core Subject
The worst-case time complexity of quicksort is:
Q53Core Subject
The effective span of a simply supported beam is:
Q54Core Subject
The material used for cutting tools is:
Q55Core Subject
The power dissipated in a resistor R with current I is:
Q56Core Subject
Which flip-flop has no race condition?
Q57Core Subject
The dry density of soil is maximum at:
Q58Core Subject
The plasticity chart classifies soil based on:
Q59Core Subject
In orthogonal cutting, the cutting edge is:
Q60Core Subject
A steel rod of 10 mm diameter carries 31.4 kN load. Stress is:
Q61Core Subject
The first law of thermodynamics is essentially:
Q62Core Subject
How many AND gates are needed for 8-to-1 multiplexer?
Q63Core Subject
The output of XOR gate with inputs (1,1) is:
Q64Core Subject
In an RC circuit, the time constant is:
Q65Core Subject
Which of the following is a universal gate?

Answer key

QSectionAnswer
1General AptitudeC
2General AptitudeB
3General AptitudeC
4General AptitudeC
5General AptitudeB
6General AptitudeC
7General AptitudeB
8General AptitudeC
9General AptitudeC
10General AptitudeB
11Core SubjectB
12Core SubjectC
13Core SubjectB
14Core SubjectB
15Core SubjectB
16Core SubjectB
17Core SubjectC
18Core SubjectB
19Core SubjectA
20Core SubjectB
21Core SubjectB
22Core SubjectC
23Core SubjectB
24Core SubjectA
25Core SubjectB
26Core SubjectB
27Core SubjectB
28Core SubjectB
29Core SubjectC
30Core SubjectB
31Core SubjectC
32Core SubjectB
33Core SubjectB
34Core SubjectC
35Core SubjectB
36Core SubjectB
37Core SubjectC
38Core SubjectA
39Core SubjectC
40Core SubjectB
41Core SubjectC
42Core SubjectB
43Core SubjectC
44Core SubjectC
45Core SubjectB
46Core SubjectC
47Core SubjectB
48Core SubjectC
49Core SubjectC
50Core SubjectC
51Core SubjectB
52Core SubjectC
53Core SubjectC
54Core SubjectB
55Core SubjectB
56Core SubjectC
57Core SubjectC
58Core SubjectB
59Core SubjectB
60Core SubjectC
61Core SubjectB
62Core SubjectC
63Core SubjectB
64Core SubjectB
65Core SubjectD

Solutions & explanations

Q1. If x + y = 10 and xy = 21, then x^2 + y^2 is:
Answer: C
x^2+y^2 = (x+y)^2 - 2xy = 100 - 42 = 58.
Q2. A man buys a book for 500 and sells it for 600. Profit percentage is:
Answer: B
Profit = 100, CP = 500. Profit% = 100/500 x 100 = 20%.
Q3. Find the next term: 3, 9, 27, 81, ?
Answer: C
Geometric progression with ratio 3: 35 = 243.
Q4. Choose the correct spelling:
Answer: C
Correct spelling: Mischievous.
Q5. If 3x + 2 = 11, then x = ?
Answer: B
3x = 9 ⇒ x = 3.
Q6. A train 150 m long passes a pole in 15 seconds. Find the speed of the train in km/h.
Answer: C
Speed = distance/time = 150/15 = 10 m/s. In km/h: 10 x (18/5) = 36 km/h.
Q7. A die is rolled once. Probability of getting an even number is:
Answer: B
Even: 2,4,6 (3 outcomes). P = 3/6 = 1/2.
Q8. Find the odd one out: 2, 4, 8, 16, 24, 32
Answer: C
All others are powers of 2 (2, 2^2, 2, 2, 2). 24 is not a power of 2.
Q9. If 5 men can build a wall in 12 days, how many days will 10 men take?
Answer: C
MD = MD -> 5x12 = 10xD -> D = 6 days.
Q10. The simple interest on 1000 at 5% per annum for 2 years is:
Answer: B
SI = PxRxT/100 = 1000x5x2/100 = 100.
Q11. Quick sand condition occurs when:
Answer: B
Quicksand: upward hydraulic gradient critical gradient (ic = Gs-1)/(1+e).
Q12. Which traversal gives sorted order in a BST?
Answer: C
Inorder traversal of BST visits nodes in ascending order (left → root → right).
Q13. TIG welding uses which electrode?
Answer: B
TIG (Tungsten Inert Gas) uses non-consumable tungsten electrode.
Q14. A semaphore that is used as a binary lock is called:
Answer: B
Mutex (mutual exclusion) is a binary semaphore used for locking in concurrent programming.
Q15. The bending moment at a simply supported beam's center with point load P at center is:
Answer: B
Mmax = PL/4 for simply supported beam with central point load.
Q16. The factor of safety is defined as:
Answer: B
FoS = ultimate load / allowable load = ultimate stress / working stress.
Q17. The main function of an operating system is:
Answer: C
The Osman ages CPU, memory, I/Ode vices, and provides resource allocation and protection.
Q18. The impedance of a capacitor of capacitance C at frequency is:
Answer: B
Zc = 1/(jC) = -j/(C).
Q19. In am in-heap, the smallest element is at:
Answer: A
Min-heap property: parent children, so root is always the minimum element.
Q20. The modulus of rigidity relates shear stress to:
Answer: B
G = τ/γ (shear stress / shear strain).
Q21. Which of the following is a linear data structure?
Answer: B
Queue is linear (elements in sequence). Tree and Graph aren on-linear data structures.
Q22. The unit of moment of inertia is:
Answer: C
Moment of inertia (area) has units of m.
Q23. An ideal op-amp has infinite:
Answer: B
Ideal op-amp: infinite input impedance, zero output impedance, infinite gain.
Q24. A stack is implemented using an array. If the top pointer is at index 5, what is the current size of the stack?
Answer: A
If top = 5 (0-indexed), there are 6 elements at indices 0 through 5.
Q25. The number of bits in a nibble is:
Answer: B
1 nibble = 4 bits. 1 byte = 2 nibbles = 8 bits.
Q26. Thevenin's theorem is used to simplify:
Answer: B
Thevenin's theorem applies to linear circuits (voltage source + series resistance).
Q27. What is the value of the integral of x^2 dx from 0 to 2?
Answer: B
The integral of x^2 dx from 0 to 2 is (1/3)x^3 from 0 to 2, which is (1/3)(2^3) - (1/3)(0^3) = (1/3)(8) = 8/3.
Q28. Kirchhoff's current law is based on:
Answer: B
KCL: sum of currents entering = sum leaving (charge conservation).
Q29. A 4-bit R-2R DAC uses resistors of values:
Answer: C
R-2R ladder DAC uses only Rand 2R resistors for binary-weighted conversion.
Q30. What is the order of the differential equation d^2y/dx^2 + 3dy/dx + 2y = 0?
Answer: B
The order of a differential equation is determined by the highest order derivative. In this case, the highest order derivative is d^2y/dx^2, which is of order 2.
Q31. Class A amplifier has conduction angle of:
Answer: C
Class A: conducts for full 360° of input cycle → low efficiency (~25%).
Q32. Which language is accepted by Pushdown Automata?
Answer: B
PDA accepts exactly the class of Context-Free Languages (CFL).
Q33. The optimum depth of a canal is when:
Answer: B
Most economical section: max hydraulic radius → min wetted perimeter.
Q34. The pH of pure water is:
Answer: C
Pure water has pH 7 at 25°C (neutral).
Q35. The cutting speed in a lathe is measured in:
Answer: B
Cutting speed = pDN/1000 m/min (D in mm, N in RPM).
Q36. In a CPU, what is the main function of the cache memory?
Answer: B
The main function of the cache memory in a CPU is to store frequently used data and instructions, which reduces the time taken to access the main memory.
Q37. The bandwidth of an ideal bandpass filter is:
Answer: C
BW = fH - fL where fH and flare upper and lower cut-off frequencies.
Q38. A language accepted by a Finite Automaton is called:
Answer: A
Finite automata accept exactly the class of regular languages (Type 3 in Chomsky hierarchy).
Q39. Beam deflection is maximum at:
Answer: C
Deflection depends on loading type. For UDL: max at center. For point load: at load point.
Q40. The unit of entropy is:
Answer: B
Entropy units: J/K (total) or kJ/kg·K (specific).
Q41. The operation of enlarging a hole is called:
Answer: C
Boring enlarges an existing hole. Reaming gives smooth finish.
Q42. The grade of concrete M20 means:
Answer: B
M20 = 20 MPa (20 N/mm²) characteristic compressive strength at 28 days.
Q43. In an isothermal process, which quantity remains constant?
Answer: C
Isothermal: T = constant, PV = constant (for ideal gas).
Q44. Which process is used to make threads on a bolt?
Answer: C
Threading (using dies) cuts external threads on bolts and rods.
Q45. The bearing capacity of soil is improved by:
Answer: B
Compaction increases soil density → higher bearing capacity.
Q46. The Euler's buckling load for a column depends on:
Answer: C
Pcr = p²EI/(Le)². Depends on E, I, effective length (end conditions).
Q47. Which memory has the fastest access time?
Answer: B
Cache memory is closest to the CPU and has the fastest access time (nanoseconds), followed by RAM, then SSD, then HDD.
Q48. The COP of a refrigerator is 4. If it extracts 200 J from cold reservoir, work input is:
Answer: C
COP = Q/W -> 4 = 200/W -> W = 50 J.
Q49. The height of a complete binary tree with nno des is:
Answer: C
Height of a complete binary tree with nno des is logn.
Q50. In virtual memory, which technique is used for address translation?
Answer: C
Paging maps virtual addresses to physical addresses using page tables, enabling virtual memory.
Q51. In a computer network, what is the purpose of the router?
Answer: B
The purpose of the router in a computer network is to connect multiple networks together and route traffic between them.
Q52. The worst-case time complexity of quicksort is:
Answer: C
Quicksort worst-case O(n^2) when pivot is smallest/largest element (e.g., sorted array with naive pivot).
Q53. The effective span of a simply supported beam is:
Answer: C
For simply supported: Le = min(Lc + d, c/c distance of supports).
Q54. The material used for cutting tools is:
Answer: B
HSS retains hardness at high cutting temperatures (used for drills, end mills).
Q55. The power dissipated in a resistor R with current I is:
Answer: B
P = I²R = V²/R = VI.
Q56. Which flip-flop has no race condition?
Answer: C
Master-slave JK flip-flop eliminates race-around condition.
Q57. The dry density of soil is maximum at:
Answer: C
Proctor test: maximum dry density at OMC (optimum moisture content).
Q58. The plasticity chart classifies soil based on:
Answer: B
Casagrande's plasticity chart: LL vs PI to classify fine-grained soils (CL, CH, ML, MH).
Q59. In orthogonal cutting, the cutting edge is:
Answer: B
Orthogonal cutting: cutting edge ⊥ to cutting velocity direction.
Q60. A steel rod of 10 mm diameter carries 31.4 kN load. Stress is:
Answer: C
A = pi(0.01)^2/4 = 7.85x10 m^2. = 31400/7.85e-5 = 400 MPa.
Q61. The first law of thermodynamics is essentially:
Answer: B
ΔU = Q - W (energy conservation for thermodynamic systems).
Q62. How many AND gates are needed for 8-to-1 multiplexer?
Answer: C
8-to-1 MUX needs 8 AND gates (one per input) + 1 OR gate.
Q63. The output of XOR gate with inputs (1,1) is:
Answer: B
XOR: output 1 when inputs differ, 0 when same. 11 = 0.
Q64. In an RC circuit, the time constant is:
Answer: B
τ = RC (time for voltage to reach 63.2% of final value).
Q65. Which of the following is a universal gate?
Answer: D
NAND and NOR are universal gates — any Boolean function can be implemented using only NAND (or only NOR) gates.