GATE Practice Set 14

15 Q · 42 min · 23 marks · Paper pattern

Generated 2026-11-16 · Paper pattern

Time Remaining: 42:00

Click any option to check your answer.

Sections: Core SubjectGeneral Aptitude
Q1. Core Subjectmodel-generated · 2026-11-16
A cantilever beam of length 2 m, flexural rigidity EI = 1 × 10⁶ N·m², carries a point load of 10 kN at its free end. The maximum deflection (in mm) at the free end is:
A. 26.7
B. 53.3
C. 13.3
D. 80.0
Correct Answer: A
Shortcut: δ = PL³/(3EI) = (10,000×8)/(3×10⁶) = 0.02667 m = 26.7 mm. Full: For a cantilever with end load, maximum deflection δ = PL³/(3EI). Substituting P=10 kN, L=2 m, EI=1×10⁶ N·m² gives δ = 26.7 mm.
Q2. General Aptitudemodel-generated · 2026-11-16
The professor's lecture was so ______ that the students, despite their best efforts, found it impossible to stay awake.
A. soporific
B. riveting
C. illuminating
D. concise
Correct Answer: A
Shortcut: The phrase 'impossible to stay awake' indicates the lecture induced sleep. Eliminate 'riveting' (engaging) and 'illuminating' (enlightening) as opposites. 'Concise' (brief) is neutral. 'Soporific' means sleep-inducing, fitting the context perfectly. Full Solution: The context clue 'despite their best efforts... impossible to stay awake' requires a word meaning causing drowsiness. Soporific directly means tending to induce drowsiness or sleep. Riveting means holding attention completely (antonym). Illuminating means providing clarity (positive). Concise means brief (irrelevant to sleep).
Q3. Core Subjectmodel-generated · 2026-11-16
A planar mechanism consists of 6 links (including ground) and 7 full joints (revolute or prismatic). The number of degrees of freedom (mobility) of the mechanism is:
A. 0
B. 1
C. 2
D. 3
Correct Answer: B
Shortcut: DOF = 3(L-1) - 2j = 3(5) - 2(7) = 15 - 14 = 1. Full: Gruebler's equation for planar mechanisms: DOF = 3(L-1) - 2j - h. With L=6 links, j=7 full joints, h=0 half joints, DOF = 3(5) - 14 = 1.
Q4. Core Subjectmodel-generated · 2026-11-16
A steam turbine receives steam at 3 MPa and 400°C (h1 = 3400 kJ/kg) and expands to 0.1 MPa. The actual exit enthalpy is 2600 kJ/kg, while the isentropic exit enthalpy at 0.1 MPa is 2400 kJ/kg. The isentropic efficiency of the turbine is:
A. 0.70
B. 0.80
C. 0.85
D. 0.90
Correct Answer: B
Shortcut: η = (h1 – h2)/(h1 – h2s) = (3400–2600)/(3400–2400) = 800/1000 = 0.80. Full: Isentropic efficiency is actual work output divided by isentropic work output. Actual work = h1 – h2 = 800 kJ/kg; isentropic work = h1 – h2s = 1000 kJ/kg. Ratio = 0.80.
Q5. Core Subjectmodel-generated · 2026-11-16
In a counterflow heat exchanger, the hot fluid enters at 120°C and leaves at 80°C. The cold fluid enters at 30°C and leaves at 70°C. The Log Mean Temperature Difference (LMTD) in °C is:
A. 40
B. 50
C. 60
D. 55
Correct Answer: B
Shortcut: For a counterflow heat exchanger, if the temperature difference at the two ends (ΔT₁ and ΔT₂) are equal, LMTD equals that common value. Here ΔT₁ = 120−70 = 50°C and ΔT₂ = 80−30 = 50°C, so LMTD = 50°C directly. Full: LMTD = (ΔT₁−ΔT₂)/ln(ΔT₁/ΔT₂). Since ΔT₁=ΔT₂=50, the formula reduces to 0/0; applying the limit gives LMTD = 50°C.
Q6. Core Subjectmodel-generated · 2026-11-16
Water (ρ = 1000 kg/m³, μ = 0.001 Pa·s) flows through a 50 mm diameter pipe at an average velocity of 2 m/s. The Reynolds number for this flow is approximately:
A. 1,000
B. 10,000
C. 100,000
D. 1,000,000
Correct Answer: C
Shortcut: Re = ρVD/μ ≈ (1000×2×0.05)/0.001 = 100,000. Full: Reynolds number is defined as Re = ρVD/μ. With ρ=1000 kg/m³, V=2 m/s, D=0.05 m, μ=0.001 Pa·s, the calculation gives Re = 100,000, indicating turbulent flow.
Q7. Core Subjectmodel-generated · 2026-11-16
A centrifugal pump operating at 1000 rpm develops a head of 50 m. If the speed is increased to 1500 rpm while maintaining similar operating conditions (affinity laws), the new head developed (in m) will be:
A. 75
B. 100
C. 112.5
D. 125
Correct Answer: C
Shortcut: Affinity law for head: H ∝ N². H₂ = H₁ × (N₂/N₁)² = 50 × (1500/1000)² = 50 × 1.5² = 50 × 2.25 = 112.5 m. Full: The affinity laws for dynamically similar pumps state Q ∝ N, H ∝ N², P ∝ N³. Substituting N₁=1000 rpm, H₁=50 m, N₂=1500 rpm gives H₂ = 50 × (1.5)² = 112.5 m.
Q8. Core Subjectmodel-generated · 2026-11-16
In an orthogonal cutting operation, the rake angle is 10° and the shear angle is 31°. The chip thickness ratio (r = t1/t2) is:
A. 0.45
B. 0.50
C. 0.53
D. 0.55
Correct Answer: D
Shortcut: r = sin φ / cos(φ – α) = sin31°/cos21° ≈ 0.515/0.934 ≈ 0.55. Full: From Merchant’s circle, chip thickness ratio r = sin φ / cos(φ – α). With φ = 31° and α = 10°, sin31° ≈ 0.515, cos21° ≈ 0.934, giving r ≈ 0.55.
Q9. Core Subjectmodel-generated · 2026-11-15
A bar chart (see image) depicts the average daily screen time (in hours) of four age groups: 10-19 (3.2 h), 20-29 (4.5 h), 30-39 (4.0 h), 40-49 (2.8 h). Which age group has a screen time that is exactly 0.5 h less than the highest group?
bar data
barHours
10-193.2
20-294.5
30-394
40-492.8
A. 10-19 years
B. 20-29 years
C. 30-39 years
D. 40-49 years
Correct Answer: C
Shortcut: Find the maximum value, then subtract 0.5. Maximum = 4.5 h (20‑29). 4.5 − 0.5 = 4.0 h, which matches the 30‑39 group. Full solution: Compare each bar: 3.2, 4.5, 4.0, 2.8. Only 30‑39 equals 4.0 h, which is 0.5 h less than 4.5 h. Hence option C.
Q10. Core Subjectmodel-generated · 2026-11-16
A spring-mass system consists of a mass of 2 kg attached to a spring of stiffness 800 N/m. The natural frequency of the system in Hz is:
A. 2.5
B. 3.18
C. 4.0
D. 5.0
Correct Answer: B
Shortcut: Natural frequency f_n = (1/2π)√(k/m). √(k/m) = √(800/2) = √400 = 20 rad/s. f_n = 20/(2π) = 10/π ≈ 3.183 Hz. Full: Angular frequency ω_n = √(k/m) = √(800/2) = 20 rad/s. Frequency in cycles per second f_n = ω_n / 2π = 20 / 2π = 10/π ≈ 3.183 Hz.
Q11. Core Subjectmodel-generated · 2026-11-16
In an orthogonal cutting operation, the rake angle is 10° and the friction angle is 20°. Using Merchant's theory, the shear angle (in degrees) is:
A. 30°
B. 35°
C. 40°
D. 45°
Correct Answer: C
Shortcut: φ = 45° + (α - β)/2 = 45° + (10° - 20°)/2 = 40°. Full: Merchant's shear angle relationship φ = 45° + α/2 - β/2. With α=10°, β=20°, φ = 45° + 5° - 10° = 40°.
Q12. Core Subjectmodel-generated · 2026-11-16
A Carnot heat pump operates between a high temperature reservoir at 300 K and a low temperature reservoir at 250 K. The Coefficient of Performance (COP) of the heat pump is:
A. 6
B. 5
C. 5.5
D. 6.5
Correct Answer: A
Shortcut: COP of Carnot Heat Pump = T_H/(T_H−T_L) (absolute temperatures). COP = 300/(300−250) = 300/50 = 6. Full: For a reversible cycle, Q_H/T_H = Q_L/T_L. Work input W = Q_H−Q_L. COP_HP = Q_H/W = Q_H/(Q_H−Q_L) = 1/(1−T_L/T_H) = T_H/(T_H−T_L) = 300/50 = 6.
Q13. General Aptitudemodel-generated · 2026-11-16
Two trains of lengths 100 m and 200 m run on parallel tracks. When running in opposite directions, they cross each other in 10 seconds. When running in the same direction, the faster train crosses the slower train in 30 seconds. What is the speed of the faster train (in m/s)?
A. 15
B. 20
C. 25
D. 30
Correct Answer: B
Shortcut: Total length = 300 m. Opposite direction relative speed = 300/10 = 30 m/s (sum of speeds). Same direction relative speed = 300/30 = 10 m/s (difference of speeds). Faster train speed = (Sum + Difference)/2 = (30 + 10)/2 = 20 m/s. Full Solution: Let speeds be x and y (x > y). x + y = 30 and x - y = 10. Adding equations: 2x = 40 => x = 20 m/s.
Q14. Core Subjectmodel-generated · 2026-11-15
The value of the contour integral ∮_C (z^2 + 1) / (z^2 - 1) dz, where C is the circle
A. 0
B. 2πi
C. 4πi
D. -2πi
Correct Answer: A
Shortcut: For a rational function P(z)/Q(z) with simple poles inside C, the integral is 2πi times the sum of residues. Residue at z=a is P(a)/Q'(a). Poles at z=1, -1 (both inside |z|=2). Residue at 1: (1+1)/(2*1) = 1. Residue at -1: (1+1)/(2*(-1)) = -1. Sum = 0. Integral = 0. Full Solution: The integrand f(z) = (z^2+1)/((z-1)(z+1)) has simple poles at z=1 and z=-1. Both lie inside the contour |z|=2. By Cauchy's Residue Theorem, ∮_C f(z) dz = 2πi Σ Res(f, z_k). Res(f, 1) = lim_{z→1} (z-1)f(z) = (1^2+1)/(1+1) = 1. Res(f, -1) = lim_{z→-1} (z+1)f(z) = ((-1)^2+1)/(-1-1) = -1. Sum of residues = 1 + (-1) = 0. Therefore, the integral value is 0.
Q15. Core Subjectmodel-generated · 2026-11-15
The power P required to drive a fan depends on density ρ, dynamic viscosity μ, angular speed ω, diameter D, and discharge Q. Using Buckingham π theorem, the number of independent dimensionless groups required to describe this phenomenon is:
A. 2
B. 4
C. 3
D. 5
Correct Answer: C
Shortcut: Buckingham π Theorem states number of π terms = n - m, where n = number of variables, m = number of fundamental dimensions (M, L, T). Variables: P, ρ, μ, ω, D, Q (n=6). Dimensions: M, L, T (m=3). π terms = 6 - 3 = 3. Full Solution: List the variables and their dimensions: Power P [ML^2T^{-3}], Density ρ [ML^{-3}], Viscosity μ [ML^{-1}T^{-1}], Angular speed ω [T^{-1}], Diameter D [L], Discharge Q [L^3T^{-1}]. Total variables n = 6. Fundamental dimensions involved are Mass (M), Length (L), Time (T), so m = 3. According to Buckingham π theorem, the number of independent dimensionless groups is n - m = 6 - 3 = 3.